Laserfiche WebLink
Model 401 & 403 Pass"Thru <br /> 0 Anthony® Service and Installation Instructions <br /> .�, • 99-21972-S001 Rev. A <br /> 13.Using a Phillips screw driver, thread a #8 tapping screw through the plastic <br /> extrusion. <br /> Plastic <br /> Shield <br /> Vertical <br /> Mullion <br /> 14.Snap J-Box cover on the wire-end of the end clip. <br /> Plastic End <br /> \-\ Cap <br /> 15.Connect the LED Light fixture wire connectors to the LED power supply <br /> NOTE: The OptiMax Pro 24V fixtures are polarity sensitive. Pay close <br /> attention when wiring the red (+) wires of the fixture to red <br /> wires of the driver, and the blue (-) wires of the driver to the <br /> black (-) wires of the fixture. <br /> 16.Turn the power on and verify LED fixture(s) are working. <br />