Laserfiche WebLink
f Anthony Model 401 & 403 Pass-Thru <br /> Service and Installation Instructions <br /> •�.Cffiww► 99-21972-S001 Rev. A <br /> 3. Engage the door with the hinge pin plug inserted into hinge pin plug receptacle <br /> at top of frame. <br /> 4. Push the door into the top of the frame with your thumb until the hinge pin plug <br /> snaps into place. <br /> 5. With the hold-open already attached to the door via a pivot stud, attach the other <br /> end to the frame throu In the hold-o en bolt rovided. <br /> ii <br /> 6. Adjust the closing force by turning the screw on the front of the Torquemaster <br /> with a flat-head screwdriver. Turn counter-clockwise to tighten, clockwise to <br /> loosen. Over-adjustment will cause door to slam. <br /> 7. If necessary to square door in the frame opening, turn screw on the <br /> torquemaster (marked SAG ADJ) with a flat-head screwdriver. <br /> 8. Do not use power tools for installation or removal. <br />