Laserfiche WebLink
0 Anthon ® Model 401 & 403 Pass-Thru <br /> y Service and Installation Instructions <br /> •�. 99-21972-S001 Rev. A <br /> 401 LED Lighting Installation Instructions <br /> Tools Required <br /> #2 Phillips Head Screwdriver Rubber or plastic mallet <br /> Cordless drill w/attachments Flat-head screwdriver <br /> Needle-nose pliers Wire stripper and cutter <br /> 1/8" drill bit 3/8" drill bit <br /> Tips <br /> • Complete replacement of wire assemblies is recommended whenever <br /> required. Splice wires only if necessary, using proper materials such as <br /> electrical tape, wire nuts, flux core solder and heat shrink. <br /> • Apply liquid soap to rail plastic covers and gaskets upon installation, to <br /> facilitate insertion into mounting grooves. <br /> • Keep doors and frames clean for product efficiency. This can also help reduce <br /> energy consumption and potential health hazards. <br /> • Whenever binding gasket or plastic parts, use food grade silicone. <br /> • Always use the correct tool for the job to be performed. This ensures proper <br /> installation and minimizes safety risks. <br /> 401 LED Approved Drivers <br /> 401 LED Driver(60-19910-0003) <br /> Specifications: <br /> • Max. Continuous Output Power: 60W <br /> • Input Voltage: 100V— 277VAC +/-10%, 50/60Hz <br /> • Output Current: 0 - 2.5A <br /> • Output Voltage: 24VDC <br /> • Min. Power Factor: >0.9 <br /> • IP rating: IP64 <br /> • Operating Temperature: -40°C to 60°C max <br /> • Approval/Class: cURus Class 2, Damp Location, FCC Part 15 Class A <br />