Laserfiche WebLink
Model 401 & 403 Pass`Thru ' <br /> ® Anthony® Service and Installation Instructions <br /> .�,=Nmw 99-21972-S001 Rev. A <br /> 401 LED Lighting <br /> Center Fixture(60-21817-xxxx) <br /> End Fixture(60-21818-xxxx) <br /> Description Center Fixture (4000K) <br /> 60" Fixture 60-21817-0002 <br /> Description Left End Fixture (4000K) <br /> 60" Fixture 60-21818-0002 <br /> Description Right End Fixture (4000K) <br /> 60" Fixture 60-21818-1002 <br /> New Driver Installation <br /> 1. When installing the new driver, keep in mind to make sure black and white <br /> wires (power) are pointed toward the top of the frame. <br /> 2. Remove the Mullion cover using a flat screwdriver. <br /> 3. Remove the raceway cover by inserting a flat screwdriver into the seam <br /> between the metal raceway and the plastic cover and prying it open. <br /> 4. Using two #8 tapping screws, install the driver just below all cables, no <br /> farther than half way down inside the mullion. <br /> NOTE: Installer may have to drill two holes in raceway to accommodate <br /> LED power supply if the door is not an Anthony model. <br />