Laserfiche WebLink
FORWARD LANDFILL WMU FU-23 GEOCOMPOSITE <br />02774 2 DRAINAGE NET <br />E. Geonet Manufacturer: The party responsible for the production of the geonet rolls from resin and for the quality control of the resin. F. Geocomposite Subsurface: The surface on which the Geocomposite lies. G. GEOSYNTHETICS CONTRACTOR: The party responsible for field handling, transporting, storing, deploying, seaming, temporarily restraining (against wind), and installing the Geocomposite. 1.4 SUBMITTALS A. Product Data: Submit the following to the QA/QC CONSULTANT. 1. Resin Data. a. Statement of production date or dates. b. Certification stating that the resin meets the product requirements (see Paragraph 2.3). c. Certification stating that all resin used in production of the geonet are of the same type. d. Copy of quality control certificates issued by manufacturer. e. Test reports from manufacturer. 2. Geocomposite Rolls. a. Statement of production date or dates, and manufacturers certificates for each day's production. b. Laboratory test results and certification stating that the Geocomposite meets the specified product requirements. c. Certification stating that all geonet rolls are furnished by one supplier, and that all rolls are manufactured from one resin type obtained from one resin supplier. d. Copy of quality control certificates issued by manufacturer and including designation of test methods used. Also include roll numbers, batch numbers, lot numbers, and roll identification. e. Test reports from the manufacturer. 1.5 QUALIFICATIONS A. GEOSYNTHETICS CONTRACTOR: Must have successfully installed a minimum of 1,000,000 square feet of geocomposite with documented references. 1.6 QUALITY ASSURANCE A. The QA/QC CONSULTANT shall monitor the quality of the geocomposite in accordance with the CQA Manual. 1.7 DELIVERY, STORAGE, AND HANDLING A. General: Conform to the manufacturer's requirements. B. Delivery. 1. Deliver materials to the site only after the QA/QC CONSULTANT accepts required submittals.