Laserfiche WebLink
<br /> <br /> <br />Forward Landfill WMU FU-23 1 GEOSYNTHETIC CLAY LINER (GCL) <br />02777 <br />SECTION 02777 GEOSYNTHETIC CLAY LINER (GCL) PART 1 GENERAL <br />1.1 WORK INCLUDED <br />A. This section covers the Work necessary to furnish and install Geosynthetic Clay Liner (GCL) on the side slopes of WMU FU-23, complete. B. The GEOSYNTHETICS CONTRACTOR shall furnish all labor, supervision, tools, equipment, and materials necessary to complete the GCL installation including, but not limited to, submittals, panel layout, seaming, temporary anchorage, and all necessary and incidental items required to complete the Work in accordance with these Specifications and the Construction Drawings. The EARTHWORK CONTRACTOR will excavate and backfill anchor trenches. The EARTHWORK CONTRACTOR will unload the GCL if the GEOSYNTHETICS CONTRACTOR is not onsite. <br /> C. The GEOSYNTHETICS CONTRACTOR shall be prepared to install the GCL sequentially with the subgrade preparation, geomembrane installation, placement of soil cover materials, and installation of the other components of the liner system. <br /> D. Prior to, during, and after installation, GCL shall not be allowed to hydrate and/or come in contact with water. <br />1.2 REFERENCES <br /> A. American Society for Testing and Materials [ASTM]: 1. ASTM D2216. Standard Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock. 2. ASTM D5321 – Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method. 3. ASTM D5887 - Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter. 4. ASTM D5993 - Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners. <br />5. ASTM D6243 - Standard Test Method for Determining the Internal and <br />Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear <br />Method. <br />6. ASTM D6495 - Standard Guide for Acceptance Testing Requirements for <br />Geosynthetic Clay Liners <br />7. ASTM D6768 – Tensile Strength Testing of Geosynthetic Clay Liners. <br />