Laserfiche WebLink
Installing a New Cartridge Ribbon <br />1. Press the left side (A) of the <br />rocker switch to toggle the <br />printer OFF (the lamp will <br />turn off). <br />2. Four small grooves (1) are <br />embossed on the left and <br />right side of the printer <br />cover. With the index finger <br />of each hand, press down <br />gently on these grooves. <br />3. When the printer cover (1) <br />is tilted up to a near -vertical <br />position, you may lift it com- <br />pletely off. <br />4. Push down on the right side <br />(B) of the ribbon cartridge <br />(2) (marked PUSH) and <br />remove the old ribbon car- <br />tridge. <br />NOTE <br />If ribbon ink gets on the <br />printer plastic case, wipe it <br />off immediately. Once it <br />dries, it is difficult to remove. <br />5. Install the new ribbon cartridge (2). Be sure the ribbon is inserted in front of <br />the paper and the ribbon is flat against the paper. Press the ribbon cartridge <br />(2) downward until it snaps into place. <br />6. Turn the knob (3) on the ribbon cartridge (marked by an arrow) clockwise to <br />stretch the ribbon so it is tight. <br />7. Replace the printer cover (1). <br />