INSTALL_2024 - Laserfiche WebLink

Home Browse Search

Veeder-Root Line Leak Application Guide PIPE TYPE TLS-4XX w/ DPLLD5,6 (Length Feet) TLS-350 w/ PLLD' (Length Feet)? BULK MODULUSZ (PSI) VOLUME (Gallons/Foot) FLEXIBLE PIPE - NUPI (Continued) TSMAD - DOUBLE WALL 1.5 INCH 30-3000 30-1100 18900 0.092 2INCH 30-3000 30-650 12500 0.163 3INCH 30-3000 30-300 28200 0.367 TSMAXPD- DOUBLE WALL 1.5 INCH 30-3000 30-1100 15500 0.092 2INCH 30-3000 30-650 9200 0.163 3INCH 30-3000 30-300 27800 0.367 FLEXIBLE PIPE - PETROTECHNIK PETROTECHNIK UPP EXTRA (63 mm) 20-3000 20-650 11,500 0.163 FLEXIBLE PIPE - TOTAL CONTAINMENT ENVIROFLEX RETRACTABLE PIPE PP1500 (1.5 INCH) 10-3000 10-1100 2400 0.092 PP1501(1.5 INCH) 10-3000 10-1100 3500 0.092 PP1502 (1.5 INCH) 10-3000 10-1100 7300 0.092 PP1503 (1.5 INCH) 10-3000 10-1100 2500 0.092 PP2500 AND PP2501(2.5 INCH) No No --- --- PP2502 (2.5 INCH) 10-3000 10-430 8700 0.255 PP2503 (2.5 INCH) 10-3000 10-430 3100 0.255 OMNIFLEX COAXIAL PIPE CP1501(1.5 INCH) 10-3000 10-1100 13,000 0.092 CP1503 (1.5 INCH) 10-3000 10-1100 4500 0.092 CP2503 (2.5 INCH) 10-3000 20-430 3900 0.255 FLEXIBLE PIPE - DOUBLE TRAC (OMEGA FLEX) UGF-FSP-16 (1.0 INCH) 30-500 30-500 31,000 0.058 UGF-FSP-24 (1.5 INCH) 30-3000 30-1100 31,000 0.116 UGF-FSP-32 (2.0 INCH) 30-3000 30-650 31,000 0.204 'Mixed Piping Types with PLLD: Using TLS-350 software Version 23 or later, PLLD is certified for 3 gph-only testing for line volumes up to 212 gallons; and for 0.2/0.1 gph testing for line volumes up to 110 gallons. To determine the line volume for mixed piping types, multiply the line length (in feet) times the'gallons/foot' value for each pipe type and add the results. For example, site has 150 feet of 2" fiberglass and 50 feet of 3" fiberglass pipe: Total line volume = [150 x 0.204] + [50 x 0.461] = 30.6 + 23.1 = 53.7 gallons ZBulk Modulus entry is only applicable to TLS-350 consoles w/software Version 23 or later and all TLS-450 Series consoles. Refer to TLS- 350 System Setup manual (P/N 576013-623) or TLS-450 Setup Manual (P/N 576013-940) for programming instructions. 3Geoflex piping produced prior to 2001 has a lower bulk modulus than the current product. For this piping (pre-2001) use the values in (). For 2001 piping and later, you must set the correct Bulk Modulus in the "User Defined" menu. 4Western Fiberglass COFLEX piping produced prior to 2005 has a different bulk modulus than the current product. For piping produced prior to 2005, use the values in ( ). 51-ine lengths shown represent DPLLD approved lengths for 3 gph and 0.2 gph testing. 3.0 gph and 0.2 gph testing for DPLLD with software version 7E or higher is certified for line volumes up to 1178.6 gallons (not to exceed 3000 feet of line). See footnote 1 for instructions on calculating line volume for mixed piping. 60.1 gph testing is certified for line volumes up to 535.6 gallons (not to exceed 1100 feet of line). See footnote 1 for instructions on calcu- lating line volume for mixed piping. 7For line lengths that exceed the maximum allowed entry (for example, 500 feet for 2-inch diameter steel piping), you must select the Pip- ing Type as "User Defined". 4