Laserfiche WebLink
Revised: 02/02/2023 5 <br />Job Steps Hazards Actions to Eliminate or Minimize Hazards RAC <br />6. Transferring <br />Material onto Property <br />- Adverse Weather (wind/ lightning) <br />- Back strain from lifting and moving materials <br />- Being struck by equipment or materials within <br />the work area <br />- Bodily Injury from Awkwad Lifting <br />- Bodily Injury from Shrubs, Cactus Needles or <br />Tree Branches <br />- Dust <br />- Earthmoving equipment (dozers, graders, <br />excavators, trenchers, rollers, compactors, <br />backhoe, skip loader) <br />- Line-of-Fire <br />- Pinch Points <br />- Slips/Trips/Falls <br />1. Clean Fill Material (soil or sand) will be brought onsite by <br />trucks, The trucks will dump the clean fill adjacent to the <br />excavation areas and ICS will utilize a backhoe to add fill <br />material in 6-inch lifts. A vibratory sheeps foot compactor will be <br />used to compact soil to 95% relative compaction.. <br />2. All power equipment must be inspected prior to use. A daily <br />inspection must be completed on SiteDocs. <br />3. Ensure that all PPE is used at all times, especially steel toe <br />boots. <br />4. When unloading material manually or with power equipment, <br />ensure that no one is in front of dumping area. <br />5. Use of proper hand tools (shovels, rakes) when spreading <br />material. <br />6. Use of landscape edging board is properly used and laid in it's <br />appropriate areas. This is to separate material. <br />L <br />NC-25-1137 Tiwana & Sons <br />1210 East Hammer Lane, Stockton, CA 95210