Laserfiche WebLink
Revised: 02/03/2023 3 <br />Job Steps Hazards Actions to Eliminate or Minimize Hazards RAC <br />3. Roll hot mix material - Struck by Equipment <br />- Property Damage <br />1. Stay out of the line-of-fire, do not work with your back toward <br />equipment, make sure they equipment operator can see you, <br />assign a dedicated spotter if you cannot maintain eye contact <br />with operator, ensure that all equipment being used has a <br />working back-up alarm. <br />2. Operator shall have a dedicated spotter when working in <br />close proximity to buildings or property. Operator and Spotter <br />shall use radios in order to maintain communication. Traffic <br />control devices such as cones, barricades, delineators and <br />caution tape shall be utilized to help protect property as well. <br />M <br />Use roller equipment to smooth out newly laid asphalt.Traffic controls devices shall be utilized to protect people and property. <br />4. Final Clean-up - Poor Housekeeping <br />- Exposure to Traffic <br />1. Do not leave tools, materials equipment, trash or debris lying <br />on the ground where they could present a hazard. <br />2. Maintain eye contact with drivers, do not work with your back <br />toward traffic. Employ traffic control devices such as barricades, <br />delineators, cones, snow fence and signage. <br />L <br />Equipment Inspection Training <br />Hand Tools Visual every Use <br />Field Training <br />Mental Risk Assessment (MRA) <br />Spotter Training <br />Involved Personnel: Field Crew <br />NC-25-1137 Tiwana & Sons <br />1210 East Hammer Lane, Stockton, CA 95210