SU-2601145 - Laserfiche WebLink

Home Browse Search

B. Landscaped planting strips between parking areas and adjacent buildings or along internal walkways; C. Landscaped islands located between parking stalls or at the ends of rows of parking stalls; and, D. On-site landscaping at the parking lot perimeter. (Development Title Section 9-406.060[3]) 6. Parking area landscaping shall include 1 tree for each 4 parking stalls (excluding and shall be evenly spaced throughout the parking lot. When planted, trees shall be at least five gallons in size. (Airpark 599 and Airport East Addendum, p. 20 and Development Title Section 9- 402.030[c][1]) 7. Native plants, particularly native trees and shrubs shall be considered as the first alternative when selecting plants. (Development Title Section 9-402.040[c][3]) i. SCREENING: 1. All storage materials and related activities, including storage areas for trash, shall be screened so as not to be visible from adjacent properties and public rights-of-ways. This screening shall be between 6 and 8 feet in height. Items stored within 100 feet of a public street or a Residential zone shall not be stacked higher than 2 feet above the adjacent screen. Exceptions can be approved by the Zoning Administrator. (Development Title Section 9-400.040[c][3][C][i]) 2. All exterior electrical cage enclosures and storage tanks shall be screened from view from adjacent public streets and Residential zones. (Development Title Section 9400.040[c][3][C][ii]) j. SIGNS: Sign details shall be consistent with Chapter 7—Signage Guidelines of the SMA SPP Addendum and be included on the Site Plan.All portions of any sign shall be set back a minimum of 5 feet from existing and future right-of-way lines and shall not block pedestrian or vehicle rights-of-way or obstruct drivers'visibility. (Development Title Section 9408.070[p]) k. BUILDING CODE REQUIREMENTS: The following 2022 California Building Code (CBC) and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: 1. A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations, prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with the California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy, Green building and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. 2. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of the code. 3. A soils report(HIGHLY Expansive soil)is required pursuant to CBC§ 1803 for foundations and PA-2600049—Conditions of Approval 3