WORK PLANS - Laserfiche WebLink

Home Browse Search

The PID will be calibrated daily by Partner personnel prior to use. Calibration will be performed in accordance with the manufacturer specifications and recorded in a log book kept with the instrument. Ambient breathing space measurements should be collected every 30 minutes. Personal Protection Equipment Based on the preliminary site information including evaluation of the hazards at the site and Partner's experience, personal protective equipment(PPE) will be required for all personnel and visitors entering the controlled portion of the site. PPE for each potential level of protection is described below. Both Level C and D PPE should be available on-site during all phases of the project, as conditions may change and require additional PPE. Work should be conducted in Level D and no breathing protection will be required as long as monitored breathing zone vapor concentrations remain in the nominal operation action level. If on-site personnel find that breathing zone concentrations remain above nominal operation action level for more than 5 minutes, then the SSO or PM will make a determination if breathing protection is needed. At this time, all work in the affected area should be suspended until a decision is made. Implementation of Level C PPE will be required if work continues during elevated breathing zone concentrations. Donning and use of respirators shall be performed in accordance with manufacturer specifications. Replacement of respirator cartridges shall be performed in accordance with manufacturer specifications.All respirators and cartridges shall be stored in air tight bags while not in use. Please refer to the PPE Levels of Protection for a detailed description of the equipment associated for each level of PPE. PPE Levels of Protection Level D(to be used at all times) is as follows: • Full-length pants and shirt; Level B (used as appropriate) is as follows: • Sturdy steel-toe work boots; • Positive-pressure, full-face piece, self-contained • Hard hat; breathing apparatus (SCBA) or positive-pressure • Safety glasses. supplied air respirator with escape SCBA (NIOSH-approved); Modified Level D(used as appropriate) is as follows: • Disposable chemical-resistant coveralls • Regular Tyvek coveralls; (Polycoated Tyvek); • Outer gloves: leather, cotton, or nitrile; • Outer gloves: neoprene or nitrile; • Inner gloves: latex or nitrile; • Inner gloves: latex or nitrile; • Sturdy steel-toe work boots; • Sturdy steel-toe work boots; • Hard hat; • Petroleum-resistant covers over work boots, • Safety glasses. • Hard hat. Level C(used as appropriate) is as follows: • Half-face air purifying, canister respirator (NIOSH-approved) equipped with Organic Vapor/HEPA cartridges/filters; • Regular Tyvek coveralls; • Outer gloves: leather, cotton, or nitrile; • Inner gloves: latex or nitrile; • Sturdy steel-toe work boots; • Hard hat; • Safety glasses. Partner Site-Specific Health and Safety Plan Page 4 Version 1.02 August 15,2016