Laserfiche WebLink
7 <br />4, Compaction <br />• Activate cart dump/compactor button. <br />3. Discharge <br />• Open load door. <br />• Activate “Dump" button on the screen od Discharge Toggle Switch. <br />• Carriage will move to discharge area. <br />• Sterilized waste discharges into compactor. <br />• Return to load position. <br />Most operations of a San-l-Pak System require a minimum operator interface. Operators are <br />needed to load the unit, (cart dumping systems are available), close the sterilization chamber <br />door, and to open the sterilization chamber door. Besides pressing a few buttons, no other <br />operator interaction is required. <br />• Press the enter button on the keypad <br />• You will hear an audible click of the door lock engaging and the red “STERILIZE” light will <br />illuminate on the panel and over the chamber door. <br />• San-I-Pak first pulls a vacuum with a minimum of 18 inches within the chamber. <br />• Air removed during the vacuum stage is mixed with superheated steam on the way to the <br />condensate tank <br />• Steam is then injected into the sterilization chamber; chamber reaches a maximum of 37 psig. <br />• After a temperature ot 280" F. is achieved; a 35-minute timer is automatically activated. <br />• Chamber quickly reaches an ultimate temperature of 281° F. - 284° F. <br />• Chamber is held in a high temperature, high-pressure environment for the full 30 minutes. <br />• Upon completion of the sterilization cycle the chamber vents down. <br />• Exiting steam is piped to the condensate tank; it condenses and Hows into the sanitary sewer. Our <br />condensate tank has a temperature probe which opens a water valve as soon as the temperature <br />probe sees temperatures of 120F, and cools it down to about 11 OF before it drains into the sanitary <br />sewer.