Laserfiche WebLink
I <br />210301-532 <br />Getinge <br />Assure■ Assure i r 1 <br />■ AccuF > : ?>o1og»«»ITestPacic | I *■o <br />San-I-Pak recommends spore testing at least once a month, per California Health and Safety Code <br />Section 118215. <br />This pack is a simple and effective method of challenging the sterilization abilities of any autoclave <br />system. With the San-l-Pak unit the testing can be accomplished quickly and easily. During a normal <br />waste processing cycle the AccuFast Biological Test pack should be placed in the chamber with the <br />waste to be processed. By loading the test kit last, near the door of the unit, it may be easily retrieved <br />upon completion of the processing cycle. <br />The San-I-Pak sterilization process can be monitored with a biological indicator containing <br />Geobacillus stearothermophilus spores. Some hospitals use the AccuFast Biological Test pack for <br />Steam. I his pack consists of a self-contained biological indicator containing Cieobacillus <br />Stearolhermophilus inside a small package of porous and nonporous materials. The integrator mark <br />on the label and the card within the pack will change color to show the pack was indeed steam <br />processed. The biological indicator located within (he pack will show the ability of the San-I-Pak to <br />penetrate the barriers within the test pack, thus achieving sterilization. <br />10e6-Expires 2023-01 <br />After removal from the San-I-Pak, check the Instant Read Integrator Record Card - The card provides <br />immediate verification that the test pack was exposed to correct sterilization parameters. The ink color <br />on the card changes from PURPLE (FAIL) to GREEN (PASS), an immediate instant red integrator <br />B. Monitoring <br />Each autoclave is equipped with recording devices, which automatically and continuously monitor <br />and record performance and process parameters throughout the autoclave cycle. The autoclave’s <br />programmable logic controller is programmed to achieve the prescribed time, temperature and the <br />process is reinitiated through another complete cycle. Through the San-I-Pak Net system, San-I-Pak <br />is also able to monitor the system from there faculty as well.