Laserfiche WebLink
environment. Motor shall be either air or dielectric oil filled with built-in automatic reset overload <br /> protection. <br /> F. Cable <br /> Pump motor and detector cables shall be suitable for submersible pump applications. Power for <br /> the motor shall be carried by a heavy-duty, flexible, water-resistant portable cable, sealed at the <br /> motor bell and of sufficient length to connect to the plug outlet as specified. The cable entry <br /> shall prevent water from leaking into the motor due to capillary action even if cable is cut or <br /> damaged. <br /> 2.04 CONTROLS -- <br /> Pump shall be controlled by an integral adjustable float control. <br /> 2.05 PIPING <br /> Exposed discharge Pipe: PVC, Schedule 80; Valves: Globe; Crane 7TF or 17TF, Lunkenheimer <br /> 123 or 214, or equal; Swing check; Lunkenheimer 230, Crane 137, or equal. <br /> PART 3 — EXECUTION <br /> 3.01 INSTALLATION <br /> Sump pump shall be installed in accordance with the manufacturer's recommendations. _ <br /> 3.02 TESTING <br /> The pump system shall be tested for control and capacity over a 30-minute period. -- <br /> SECTION 11385 — CHEMICAL FEED AND ACCESSORIES <br /> PART 1 — GENERAL <br /> 1.01 DESCRIPTION <br /> A. Scope <br /> This section specifies accessories for feeding NEAT solutions of sodium hypochlorite. <br /> B. Design Requirements <br /> Equipment provided under this section shall be suitable for 12.5 % Sodium hypochlorite. <br /> 1.02 SUBMITTALS <br /> A. Submittals shall be provided in accordance with Section 01300. <br /> 1.03 MEASUREMENT AND PAYMENT <br /> No measurement will be made. Full compensation for conforming to these requirements, <br /> including all the labor, materials, tools, equipment, incidentals and for doing all the work <br /> Division III-131 NEI Phase II Water and Sewer <br /> July 2007 CIP Nos. 7468, 7589,7590 <br />