Laserfiche WebLink
Property Requirement <br /> Gel time minutes,maximum 30 <br /> On 3-mm cast sheet,cured 18 hours at 25°C,+5 hours at <br /> 70°C <br /> Tensile Strength,MPa 2.7 min. <br /> Elongation,percent 90 min. <br /> Shore D Hardness 45 min. <br /> Directions for Use: <br /> • Saw cuts shall be cleaned with compressed air to remove all excess moisture and debris. For repairing damaged saw <br /> cuts, all loose spalled material shall be cleaned away from the saw cut,chipping back to sound asphalt concrete or portland <br /> cement concrete and all loose material cleaned from loop wires. <br /> • The mixing ratio shall be in conformance with the manufacturer's recommendations. No more material shall be <br /> mixed than can be used within the gel time from the time mixing operations are started. <br /> • When automatic mixing equipment is used for mixing the sealant, the provisions in the twelfth paragraph in <br /> Section 85-1.06,"Placement,"shall apply. <br /> 95-2.10 (BLANK) <br /> 95-2.11 EPDXY RESIN ADHESIVE FOR INJECTION GROUTING OF PORTLAND CEMENT CONCRETE <br /> PAVEMENTS <br /> Directions for Use: <br /> • Both components and the mixed material shall contain no solvents. The mixing ratio of the components in terms of <br /> volume and mass shall be clearly stated. The material shall be suitable for use in the mixing equipment used by the <br /> applicator. Epoxy adhesive samples shall be furnished to the Engineer for testing at least 12 days before the expected time of <br /> use. <br /> Contract No. 10-OM7104 <br /> 100 <br />