Laserfiche WebLink
Section 15060 <br /> PIPING SYSTEMS <br /> A. Shop Drawings <br /> Detailed, dimensioned piping layout and support shop drawings to scale for all piping <br /> systems, including specific locations of all anchors, supports, braces and instrument taps. <br /> Piping layout and support drawings shall be submitted for information only in accordance <br /> with Special Provisions Section SP-08, SUBMITTALS a minimum of 6 weeks prior to <br /> construction. <br /> B. Manufacturer's Data <br /> i. lvianufactUrer'S data and catalog infGriiiatiGri for all. piping SySteiiL components <br /> including: <br /> a. Pipe material identified with ASTM or other conformance standard. <br /> b. Flanges, fittings, connections, gaskets. <br /> C. Valves and appurtenances. <br /> 2. Manufacturer's catalog information, pressure rating and materials of construction for <br /> mechanical joint restraints. <br /> C. Flushing and Disinfection Plan <br /> Contractor's plan describing step by step procedures for flushing and disinfecting pipelines. <br /> 1.04 OPERATION AND MAINTENANCE INFORMATION <br /> Submit operation and maintenance instructions in accordance with Section 01730, <br /> OPERATING.AND MAINTENANCE INFORMATION. A copy of Section 01730 with <br /> each paragraph check marked to show compliance shall be submitted. O&M instructions <br /> shall be submitted after the submittals specified in Paragraph 1.03 of this section have been <br /> returned "NO EXCEPTIONS TAKEN" or"MAKE CORRECTIONS NOTED". O&M <br /> instructions shall reflect the approved materials and equipment. <br /> 1.05 DEFINITIONS <br /> Terms used in Section 15060, PIPING SYSTEMS and elsewhere in Division 15 are defined <br /> as follows: <br /> 1. Pressure Terms: <br /> a. Maximum: The greatest continuous pressure at which the piping system <br /> operates. <br /> Walnut Grove Sewer Project(Conformed) 15060-2 SA0160401 <br /> March 2008 nAsa0160401\specs\wg conform\div 15\15060.doc <br />