Laserfiche WebLink
SECTION 15060 <br /> PIPING SYSTEMS <br /> PART 1 - GENERAL <br /> 1.01 SCOPE <br /> The Contractor shall furnish, install, and place into successful operation all piping systems <br /> specified herein this Section 15060, PIPING SYSTEM, and as shown on the plans. A piping <br /> system shall include all the pipes, fittings, closure pieces, supports, bolts, nuts, gaskets, <br /> jointing materials, and appurtenances as shown and specified. <br /> 1.02 QUALITY ASSURANCE <br /> A. References <br /> The publications referred to hereinafter form a part of this specification to the extent <br /> referenced. The publications are referred to in the text by the basic designation only. The <br /> latest edition of referenced publications in effect at the time of the bid shall govern. In case <br /> of conflict between the requirements of this section and the listed standards, the <br /> requirements of this section shall prevail. <br /> International Conference of Building Officials (ICBO) Publications: <br /> UPC Uniform Plumbing Code <br /> American National Standards Institute (ANSI) Publications: <br /> ANSI A13.1 Scheme for the Identification of Piping Systems <br /> American Water Works Association (AWWA) Publications: <br /> AWWA C651 Disinfecting Water Mains <br /> 1.03 SUBMITTALS <br /> The Contractor shall submit information in accordance with Special Provisions Section <br /> SP-08, SUBMITTALS, to substantiate compliance with this specification. In addition, the <br /> following specific information shall be submitted. <br /> Walnut Grove Sewer Project (Conformed) 15060-1 SAO 160401 <br /> March 2008 n:Asa0160401�specs\w,,conform\div, 15\15060.doc <br />