Permits & Development - Encroachment(EP)/Driveway(DW) Permits - 2011_PS-1102000 thru PS-1102500_ - PS-1102202

Home Browse Search

Special Conditions for -3- ENCROACHMENT PERMIT 21. Access to all properties shall be maintained at all times except when work is occurring at the access point. Minimal delays will be allowed to provide access within the work zone area. Driveway access shall be fully restored at the end of each workday. Driveways disturbed by the contractor shall be replaced with in-kind or better materials. 22. Residents and businesses shall be notified in writing, as approved by the County, 48-hours in advance of any impacts to their access. 23. A report describing a public information campaign to inform affected residents and businesses shall be submitted to the County for approval prior to beginning work. 24. Existing fences shall not be removed without written consent signed by the property owner and submitted to the County prior to the removal. Fences removed shall be restored with in-kind or better materials. 25. County roads shall be kept clean from mud and debris at all times along the access points and work zone areas during entire project. All standard roadway striping and signage shall be clearly visible, maintained and restored throughout the construction zone during and after the project. 26. In addition to standard dust control measures, streets shall be maintained in a clean condition, free of dirt, mud and debris during construction activities. The contractor shall provide daily, or as needed, street sweeping using a modern mechanical or vacuum- assisted street sweeper. 27. The contractor shall not conduct construction operations in rain or heavy fog conditions. 28. Roadway areas subject to pavement cuts shall receive a 0.12-foot asphalt concrete overlay from the centerline to the edge of the traveled way. If the pavement is disturbed on both sides of the centerline (or adjacent lane), then the entire roadway (or affected lanes) shall be resurfaced. All pavement conforms shall be ground to provide a flush surface. Contractor shall grind and overlay within 10 working days of permanent trench paving. Shoulder areas shall be replaced with Class II Aggregate Base and brought up to the finish grade as directed by the County.