Laserfiche WebLink
Areas: <br />T he entire shoulder_of the road is to be <br />resurfaced. The existing surfacing adjacent to the <br />trenched area shall be planed to accommodate <br />tl�e overlay in a manner that does not cause <br />drainage concerns. The nearest pavement cut <br />shall be a minimum of three (3) feet from the edge <br />of pavement, or the remaining pavement shall <br />aIso be removed and replaced. (See County <br />Standard Drawing No. R-37). <br />2. Longitudinal T rencl�es within T ravePed Lanes: <br />The entire traveled la��e vvhere the trench is located is to be <br />resurfaced with a one (1) inch_as.phalt concrete overlay. The <br />existing surfacing adjacent to the trenched area shall be planed <br />to accommodate the overlay in a manner that does not cause <br />drainage concerns. The overlay shall be in accordance with State <br />Standard Specifications, Section 39. Aggregate gradation shall be <br />consistent with the existing surfacing material. (See County <br />Standard Drawing No. R-37). <br />3. Cross -Cutting: <br />Crass -cuffing is allowed of a minimum interval of 150 feet. At each <br />Dross -cut location a minimum of fen (10) feet on each side of <br />trench shall be planed and resurfaced with one (1) inch asphalt <br />concrete. If cross cuts are within the 150 feet minimum interval, the <br />entire section between the first and Past cross cut shall be planed <br />and resurfaced with one (1) inch asphalt concrete. (See County <br />Standard Drawing No. R-36). <br />4. The conditions described in paragraphs 1, 2 and 3 above will not <br />apply if resurfacing is scheduled within two years. <br />2-5.03 Local Roads <br />A. Surfacing Age Under Three (3) years: No pavement cuts allowed. <br />Exceptions may be approved in accordance with Section 2-5.04 <br />EXCEPTIONS, <br />B. Surfacing Age Three (3) to Five (5) Years: <br />1. Longitudinal cuts are permitted. A seal coat is required for that half of <br />the roadway containing the trench. (See County Standard Drawing <br />No. R-37). <br />42 <br />