|
CERTIFICATE OF COMPLIANCE (Part 1 of 4) LTG -1 -
<br />PROJECT NAME
<br />DATE
<br />Wilhelmina Lift Station
<br />3/28/2006
<br />PROJECT ADDRESS
<br />Elec. Room
<br />Stockton
<br />154
<br />PRINCIPAL DESIGNER - LIGHTING
<br />TELEPHONE
<br />Building Permit It
<br />Interface Engineering
<br />capable of automatically shutting off the lighting.
<br />❑ LTG -2-A: Lighting Control Acceptance Document
<br />DOCUMENTATION AUTHOR
<br />TELEPHONE
<br />Checked by/Date
<br />INTERFACE ENGINEERING
<br />(916) 288-6200
<br />Enforcement ftency Use
<br />GENERAL INFORMATION
<br />DATE OF PLANS
<br />UILDING CONDITIONED FLOOR AREA
<br />CLIMATE ZONE
<br />❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document
<br />209 Sq.Ft.
<br />1 12
<br />BUILDING TYPE ® NONRESIDENTIAL HIGH RISE RESIDENTIAL ❑ HOTELIMOTEL GUEST ROOM
<br />® CONDrriONED SPACES® UNCONDITIONED SPACES INDOOR 8: OUTDOOR SIGNS
<br />PHASE OF CONSTRUCTION [K NEW CONSTRUCTION ADDITION ALTERATION
<br />METHOD OF LIGHTING EJ COMPLETE BUILDING ® AREA CATEGORY E] TAILORED [:] PERFORMANCE
<br />COMPLIANCE [:] COMMON LIGHTING
<br />STATEMENT OF COMPLIANCE
<br />This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24,
<br />Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building lighting requirements.
<br />The documentation preparer hereby certifies that the documentation is accurate and complete.
<br />DOCUMENTATION AUTHOR
<br />SIGNATURE
<br />DATE
<br />Interface Engineering
<br />The Principal Lighting Designer hereby certifies that the proposed building design represented in this set of construction
<br />documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other
<br />Calculations submitted with this permit application. The proposed building has been designed to meet the lighting
<br />requirements contained in Sections 110, 119, 130 through 132, and 146, 148 and 149 of Title 24, Part 6.
<br />Please Check One: (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.)
<br />® I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this
<br />document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer
<br />or electrical engineer, or I am a licensed architect.
<br />I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by Section 5537.2 or
<br />6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing
<br />this work.
<br />❑ 1 affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code to sign this document
<br />because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code
<br />Sections 5537, 5538 and 6737.1.
<br />L4 09!4
<br />PRINCIPAL LIGHTING DESIGNER - NAME
<br />SIGNA
<br />DATE
<br />LIC. #
<br />Interface EngineeringE-013118
<br />a
<br />LIGHTING MANDATORY MEASURES
<br />Indicate location on plans of Note Block for Mandatory Measure 4.14
<br />LIGHTING COMPLIANCE FORMS & WORKSHEET Check box if worksheet is included
<br />® LTG -1-C, Parts 1 of 4 and 2 of 4: Certificate of Compliance. Part 1 of 4 and 2 of 4 are required for all submittals
<br />®LTG -1-C, Part 3 of 4: Certificate of Compliance. Part 3 of 4 submittal is required only if Control Credits are claimed
<br />® LTG -1-C, Part 4 of 4: Certificate of Compliance. Part 4 of 4 submittal is required when lighting controls are installed
<br />❑LTG -2-C: Indoor Lighting Schedule
<br />[]LTG -3-C: Portable Lighting Worksheet
<br />®LTG -4-C: Lighting Controls Credit Worksheet
<br />❑LTG -5-C: Indoor Lighting Power Allowance
<br />❑LTG -6-C: Tailored Method Worksheet
<br />❑LTG -7-C: Room Cavity Ratio Worksheet
<br />[]LTG -8-C: Common Lighting Systems Method Worksheet
<br />,[]LTG -9-C: Line Voltage Track Lighting Worksheet
<br />EnergyPro 4.0 by EnergySoft User Number. 4822 Job Number: Page:1 of 10
<br />LIGHTING MANDATORY MEASURES LTG -MM
<br />PROJECT NAME DATE
<br />Wilhelmina Lift Station 3/28/2006
<br />DESCRIPTION
<br />Designer
<br />Enforcement
<br />131(d)1For every floor, all interior lighting systems shall be equipped with a separate automat
<br />PERFORMANCE METHOD
<br />COMMMON LIGHTING SYSTEM (From LTG -8-C)
<br />Elec. Room
<br />control to shut off the lighting. This automatic control shall meet the requirements of
<br />154
<br />A. Certifies plans, specifications, installation certificates, and operating and maintenance
<br />Section 119 and may be an occupancy sensor, automatic time switch, or other device
<br />[MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS
<br />Test Description
<br />capable of automatically shutting off the lighting.
<br />❑ LTG -2-A: Lighting Control Acceptance Document
<br />AND
<br />- Occupancy Sensor Acceptance
<br />DIAGRAM
<br />E] 131(d)20verride for Building Lighting Shutoff: The automatic building shutoff system is
<br />provided with a manual, accessible override switch in sight of the lights. The area of
<br />- Automatic Time Switch Control Acceptance
<br />w
<br />override is not to exceed 5,000 square feet -
<br />>�
<br />❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document
<br />�
<br />W
<br />FX] 119(h) Automatic Control Devices Certified: All automatic control devices specified are
<br />certified, all alternate equipment shall be certified and installed as directed by the
<br />0
<br />X:
<br />manufacturer,
<br />cc
<br />❑X 111 Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for the
<br />project are certified and listed in the Directory. All installed fixtures shall be certified.
<br />132 Tandem Wiring for One and Three Lamp Fluorescent Fixtures: All one and three lamp
<br />fluorescent fixtures are tandem wired with two lamp ballasts where required by
<br />1116
<br />i r/
<br />Standards Section 132; or all one and three lamp fluorescent fixtures are specified
<br />1
<br />U
<br />si
<br />with electronic high -frequency ballasts and are exempt from tandem wiring
<br />r w
<br />requirements.
<br />Qn
<br />J
<br />rW cc
<br />Z
<br />it
<br />O
<br />0 131(a) Individual Room/Area Controls: Each room and area in this building is equipped with
<br />a separate switch or occupancy sensor device for each area with floor -to -ceiling
<br />I
<br />walls.
<br />a
<br />El131(b) Unfform Reduction for Individual Rooms: All rooms and areas greater than 100
<br />square feet and more than 0.8 watts per square foot of lighting load shall be
<br />O
<br />o
<br />controlled with bilevel switching for uniform reduction of lighting within the room.
<br />a
<br />❑ 131(c) Daylight Area Control: All rooms with windows and skylights that are greater than
<br />z
<br />I�i tJ0 �
<br />250 square feet and that allow for the effective use of daylight in the area shall have
<br />W X
<br />50% of the lamps in each daylit area controlled by a separate switch; or the effective
<br />M
<br />use of daylight cannot be accomplished because the windows are continuously
<br />O
<br />shaded by a building on the adjacent lot. Diagram of shading during different times
<br />o
<br />U) z
<br />of the year is included on plans.
<br />131(x) Display Lighting. Display lighting shall be separately switched on circuits that are
<br />20 amps or less.
<br />EnergyPro 4.0 by FnergySoft User Number: 4822 Job Number: Page:10 of 10
<br />CERTIFICATE OF COMPLIANCE (Part 2 of 4)
<br />PROJECT NAME NAME DATE
<br />Wilhelmina Lift Station 1 3/28/2006
<br />INSTALLED INDOOR LIGHTING POWER FOR CONDITIONED AND UNCONDITIONED SPACES
<br />INSTALLED
<br />WATTS
<br />INSTALLED LIGHTING, CONDITIONED SPACES (From LTG -2-C) 118
<br />PORTABLE LIGHTING (From LTG -3-C) 0
<br />LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C) 24
<br />CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 94
<br />INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 177
<br />LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) 35
<br />UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 142
<br />ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES
<br />COMPLETE BUILDING METHOD (From LTG -5-C)
<br />AREA CATEGORY METHOD (From LTG-5-C)WATTS
<br />TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER
<br />ALLOWED
<br />146
<br />ALTERNATE COMPLIANCE
<br />Check if
<br />SPACE CONTROLLED Daylighting
<br />PERFORMANCE METHOD
<br />COMMMON LIGHTING SYSTEM (From LTG -8-C)
<br />Elec. Room
<br />ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C)
<br />154
<br />A. Certifies plans, specifications, installation certificates, and operating and maintenance
<br />information meet the requirements of 10-103(b) and Title 24 Part 6.
<br />[MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS
<br />Test Description
<br />CONTROL LOCATIOI
<br />(Room #)
<br />I CONTROL
<br />IDENTIFICATION
<br />CONTROL TYPE
<br />(Auto Time Switch, Dimming, etc.)
<br />Check if
<br />SPACE CONTROLLED Daylighting
<br />NOTETO
<br />FIELD
<br />Elec. Room
<br />Before an occupancy permit is granted for a newly constructed building or space, or a new lighting
<br />system system serving a building or space is operated for normal use, all control devices serving the
<br />building or space shall be certified as meeting the Acceptance Requirements for Code Compliance.
<br />In addition a Certificate of Acceptance, LTG -1-A, Forms shall be submitted to the building departme
<br />Occ Sensor - <- 250 sgfl
<br />A. Certifies plans, specifications, installation certificates, and operating and maintenance
<br />information meet the requirements of 10-103(b) and Title 24 Part 6.
<br />a
<br />Test Description
<br />Test Performed By:
<br />❑ LTG -2-A: Lighting Control Acceptance Document
<br />AND
<br />- Occupancy Sensor Acceptance
<br />DIAGRAM
<br />- Manual Daylight Controls Acceptance
<br />- Automatic Time Switch Control Acceptance
<br />w
<br />Equipment requiring acceptance testing
<br />>�
<br />❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document
<br />�
<br />W
<br />Equipment requiring acceptance testing
<br />0)
<br />0
<br />X:
<br />cc
<br />:Y
<br />4ei Z w
<br />U
<br />w
<br />Q
<br />o
<br />1116
<br />i r/
<br />1
<br />U
<br />si
<br />a
<br />r w
<br />rn
<br />Qn
<br />J
<br />rW cc
<br />Z
<br />it
<br />I EnergyPro 4.0 by EnergySoft User Number 4822 Job Number Paget of 10
<br />go 44 %Id I8 - A& -
<br />FiLE: 1tDWO - 4.14 1 EDIT: 3/79%2008 904 AM BY USINSIG I PLOT: 3/29/2006 10:00 AM BY JOHN USINSKI
<br />CERTIFICATE OF COMPLIANCE (Part 3 of 4) LTG -1 -
<br />PROJECT NAME DATE
<br />Wilhelmina Lift Station 1 3/28/2006
<br />CONTROLS FOR CREDIT IN CONDITIONED AND UNCONDITIONED SPACES
<br />CONTROL LOCATI01
<br />(Room # or Dwg. #)
<br />CONTROL
<br />IDENTIFICATION
<br />CONTROL TYPE
<br />Occupant, Daylight, Dimming, etc
<br />TYPE J OF LUMINAIRES
<br />D 2
<br />NOTETO
<br />FIELD
<br />Elec. Room
<br />Before an occupancy permit is granted for a newly constructed building or space, or a new lighting
<br />system system serving a building or space is operated for normal use, all control devices serving the
<br />building or space shall be certified as meeting the Acceptance Requirements for Code Compliance.
<br />In addition a Certificate of Acceptance, LTG -1-A, Forms shall be submitted to the building departme
<br />Occ Sensor - <- 250 sgfl
<br />A. Certifies plans, specifications, installation certificates, and operating and maintenance
<br />information meet the requirements of 10-103(b) and Title 24 Part 6.
<br />a
<br />Test Description
<br />Test Performed By:
<br />❑ LTG -2-A: Lighting Control Acceptance Document
<br />AND
<br />- Occupancy Sensor Acceptance
<br />DIAGRAM
<br />- Manual Daylight Controls Acceptance
<br />- Automatic Time Switch Control Acceptance
<br />w
<br />Equipment requiring acceptance testing
<br />>�
<br />❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document
<br />�
<br />W
<br />Equipment requiring acceptance testing
<br />0)
<br />0
<br />X:
<br />cc
<br />:Y
<br />4ei Z w
<br />U
<br />w
<br />Q
<br />o
<br />1116
<br />i r/
<br />1
<br />U
<br />si
<br />a
<br />r w
<br />rn
<br />Qn
<br />J
<br />rW cc
<br />Z
<br />it
<br />O
<br />z
<br />w
<br />I
<br />a
<br />Q
<br />O
<br />o
<br />a
<br />0
<br />z
<br />I�i tJ0 �
<br />o
<br />Z
<br />W X
<br />Q
<br />U
<br />M
<br />O
<br />0 0
<br />o
<br />U) z
<br />-,>
<br />CERTIFICATE OF COMPLIANCE (Part 4 of 4) LTG -1 -
<br />PROJECT NAME
<br />Wilhelmina Lift Station
<br />DATE
<br />1 3/28/2006
<br />Designer:
<br />This form is to be used by the designer and attached to the plans. Listed below are all the acceptan
<br />tests for lighting systems. The designer is required to check the boxes by all acceptance tests that
<br />apply and list all equipment that require an acceptance test. If all equipment of a certain type require
<br />a test, list the equipment description and the number of systems to be tested in parentheses. The N
<br />number designates the Section in the Appendix of the Nonresidential ACM Manual that describes th
<br />test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, desi
<br />professional or an agent selected by the owner). Since this form will be part of the plans, completion
<br />of this section will allow the responsible party to budget for the scope of work appropriately.
<br />Building Departments:
<br />Before an occupancy permit is granted for a newly constructed building or space, or a new lighting
<br />system system serving a building or space is operated for normal use, all control devices serving the
<br />building or space shall be certified as meeting the Acceptance Requirements for Code Compliance.
<br />In addition a Certificate of Acceptance, LTG -1-A, Forms shall be submitted to the building departme
<br />that:
<br />A. Certifies plans, specifications, installation certificates, and operating and maintenance
<br />information meet the requirements of 10-103(b) and Title 24 Part 6.
<br />a
<br />Test Description
<br />Test Performed By:
<br />❑ LTG -2-A: Lighting Control Acceptance Document
<br />AND
<br />- Occupancy Sensor Acceptance
<br />DIAGRAM
<br />- Manual Daylight Controls Acceptance
<br />- Automatic Time Switch Control Acceptance
<br />w
<br />Equipment requiring acceptance testing
<br />>�
<br />❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document
<br />�
<br />W
<br />Equipment requiring acceptance testing
<br />0)
<br />0
<br />X:
<br />cc
<br />:Y
<br />4ei Z w
<br />U
<br />w
<br />EnergyPro 4.0 by Ener ySoft User Number. 4822 Job Number: Page4 of 10
<br />[FOR REDUCED PLANS ORIGINAL SCALE IS IN INCHES
<br />Q
<br />�
<br />AND
<br />INSTRUMENTATION
<br />DIAGRAM
<br />#1
<br />Z5O
<br />0r3
<br />A.
<br />o
<br />AND
<br />Z GL R
<br />a
<br />#2
<br />3:
<br />PROCESS
<br />AND
<br />a
<br />DIAGRAM
<br />#3
<br /><3�M
<br />O<1
<br />0 X W
<br />w
<br />Q ONi
<br />>�
<br />N
<br />O+
<br />�
<br />W
<br />rn
<br />0)
<br />0
<br />X:
<br />cc
<br />:Y
<br />4ei Z w
<br />U
<br />w
<br />Q
<br />o
<br />1116
<br />i r/
<br />1
<br />U
<br />si
<br />a
<br />r w
<br />rn
<br />Qn
<br />J
<br />rW cc
<br />Z
<br />it
<br />O
<br />z
<br />w
<br />I
<br />a
<br />Q
<br />O
<br />o
<br />ELECTRICAL AND HVAC
<br />DRAWING INDEX
<br />4.14 ELECTRICAL AND HVAC DRAWING INDEX
<br />4.15 ELECTRICAL SYMBOLS AND ABREVIATIONS
<br />4.16 SINGLE LINE DIAGRAM - MOTOR CONTROL CENTER 'MCC -1'
<br />4.17 'MCC -1' ELEVATION, NAMEPLATE SCHEDULE AND CALCS.
<br />4.18 CONTROL WIRING DIAGRAMS #1
<br />4.19 CONTROL WIRING DIAGRAMS #2
<br />4.20 SITE PLAN - ELECTRICAL
<br />4.21 ELECTRICAL BUILDING FLOOR PLAN - POWER
<br />4.22 ELECTRICAL BUILDING FLOOR PLAN - LIGHTING
<br />4.23 CONDUIT AND WIRE SCHEDULE
<br />4.24 ELECTRICAL DETAILS #1
<br />4.25 ELECTRICAL DETAILS #2
<br />4.26 INSTRUMENTATION SYMBOLS AND ABREVIATIONS
<br />4.27
<br />PROCESS
<br />AND
<br />INSTRUMENTATION
<br />DIAGRAM
<br />#1
<br />4.28
<br />PROCESS
<br />AND
<br />INSTRUMENTATION
<br />DIAGRAM
<br />#2
<br />4.29
<br />PROCESS
<br />AND
<br />INSTRUMENTATION
<br />DIAGRAM
<br />#3
<br />4.30 INST. CONTROL PANEL 'ICP' ELEVATIONS
<br />4.31 INST. CONTROL PANEL 'ICP' WIRING DIAGRAM #1
<br />4.32 INST. CONTROL PANEL 'ICP' WIRING DIAGRAM #2
<br />4.33 INST. CONTROL PANEL 'ICP' WIRING DIAGRAM #3
<br />4.34 INST. DETAILS AND CONTROL SYSTEM BLOCK DIAGRAM
<br />4.35 HVAC SYMBOLS AND NOTES
<br />4.36 ELECTRIAL BUILDING FLOOR PLAN - HVAC
<br />4.37 HVAC SCHEDULE AND DETAILS
<br />Q�Of ESS/pN
<br />MWICYAL UES DPRET
<br />ClryOF STOWON,
<br />04L[FOR NZI
<br />mu N
<br />1F T
<br />rF OF ca��F°� cam N AMW DIRIM
<br />Em ma
<br />an1
<br />MW A
<br />a
<br />O
<br />w
<br />?I
<br />0
<br />a.
<br />2
<br />0
<br />cr
<br />C
<br />LCL
<br />LL
<br />O
<br />N
<br />n
<br />L0
<br />N
<br />0)
<br />0
<br />04
<br />6, '0
<br />v
<br />1
<br />1V)rn x
<br />M
<br />o a�
<br />O
<br />O
<br />■■
<br />W O M
<br />ZN
<br /><3�M
<br />O<1
<br />0 X W
<br />Q
<br />Q ONi
<br />\
<br />N
<br />O+
<br />�
<br />W
<br />M
<br />0)
<br />0
<br />X:
<br />w
<br />Y
<br />U
<br />w
<br />Q
<br />o
<br />U
<br />�
<br />rn
<br />Qn
<br />J
<br />O
<br />o �
<br />I
<br />Q
<br />O
<br />o
<br />a
<br />0
<br />z
<br />I�i tJ0 �
<br />o
<br />Z
<br />W X
<br />Q
<br />U
<br />M
<br />O
<br />0 0
<br />o
<br />U) z
<br />-,>
<br />?I
<br />0
<br />a.
<br />2
<br />0
<br />cr
<br />C
<br />LCL
<br />LL
<br />O
<br />V�
<br />U
<br />J X
<br />O
<br />O�
<br />I
<br />r0
<br />VJ z
<br />a:
<br />Z �
<br />W
<br />� U
<br />W Q
<br />J
<br />W =
<br />Q
<br />Zz
<br />W Q
<br />Q
<br />Z Q
<br />� U
<br />W �
<br />= U
<br />J W
<br />Ld
<br />i
<br />T- U-
<br />0
<br />1
<br />D
<br />Q
<br />J
<br />a
<br />UL
<br />O
<br />W
<br />N
<br />n
<br />I
<br />rn
<br />N
<br />0)
<br />0
<br />04
<br />6, '0
<br />v
<br />1
<br />1V)rn x
<br />o a�
<br />O
<br />O
<br />Q
<br />■■
<br />W O M
<br />ZN
<br /><3�M
<br />O<1
<br />0 X W
<br />Q ONi
<br />O N�
<br />N
<br />O+
<br />�
<br />W
<br />M
<br />Z
<br />O
<br />X:
<br />V�
<br />U
<br />J X
<br />O
<br />O�
<br />I
<br />r0
<br />VJ z
<br />a:
<br />Z �
<br />W
<br />� U
<br />W Q
<br />J
<br />W =
<br />Q
<br />Zz
<br />W Q
<br />Q
<br />Z Q
<br />� U
<br />W �
<br />= U
<br />J W
<br />Ld
<br />i
<br />T- U-
<br />0
<br />1
<br />D
<br />Q
<br />J
<br />a
<br />UL
<br />O
<br />W
<br />
|