|
DIVISION 5.4 MATERIAL CONSERVATION AND RESOURCE
<br />EFFICIENCY
<br />SECTION 5.401 GENERAL
<br />5.401.1 SCOPE. The provisions of this chapter specify the requirements of achieving material conservation, resource
<br />efficiency, and greenhouse gas (GHG) emission reduction through protection of buildings from exterior moisture,
<br />construction waste diversion, employment of techniques to reduce pollution through recycling of materials, the
<br />installation of products with lower GHG emissions and building commissioning or testing and adjusting.
<br />SECTION 5.408 CONSTRUCTION WASTE REDUCTION, DISPOSAL AND
<br />RECYCLING
<br />5.408.1 CONSTRUCTION WASTE MANAGEMENT. Recycle and/or salvage for reuse a minimum of 65% of the
<br />non-hazardous construction and demolition waste in accordance with Section 5.408.1.1, 5.408.1.2 or 5.408.1.3; or
<br />meet a local construction and demolition waste management ordinance, whichever is more stringent.
<br />5.408.1.1 Construction waste management plan. Where a local jurisdiction does not have a construction and
<br />demolition waste management ordinance, submit a construction waste management plan that:
<br />1. Identifies the construction and demolition waste materials to be diverted from disposal by efficient
<br /> usage, recycling, reuse on the project or salvage for future use or sale.
<br />2. Determines if construction and demolition waste materials will be sorted on-site (source-separated) or
<br /> bulk mixed (single stream).
<br />3. Identifies diversion facilities where construction and demolition waste material collected will be taken.
<br />4. Specifies that the amount of construction and demolition waste materials diverted shall be calculated
<br /> by weight or volume, but not by both.
<br />5.408.1.2 Waste Management Company. Utilize a waste management company that can provide verifiable
<br />documentation that the percentage of construction and demolition waste material diverted from the landfill
<br />complies with this section.
<br />Note: The owner or contractor shall make the determination if the construction and demolition waste material
<br />will be diverted by a waste management company.
<br />Exceptions to Sections 5.408.1.1 and 5.408.1.2:
<br />1. Excavated soil and land-clearing debris.
<br />2. Alternate waste reduction methods developed by working with local agencies if diversion or recycle
<br /> facilities capable of compliance with this item do not exist.
<br />3. Demolition waste meeting local ordinance or calculated in consideration of local recycling facilities
<br /> and markets.
<br />5.408.1.3 Waste stream reduction alternative. The combined weight of new construction disposal that does
<br />not exceed two pounds per square foot of building area may be deemed to meet the 65% minimum requirement
<br />as approved by the enforcing agency.
<br />5.408.1.4 Documentation. Documentation shall be provided to the enforcing agency which demonstrates
<br />compliance with Sections 5.408.1.1, through 5.408.1.3. The waste management plan shall be updated as
<br />necessary and shall be accessible during construction for examination by the enforcing agency.
<br />Notes:
<br />1. Sample forms found in "A Guide to the California Green Building Standards Code (Nonresidential)"
<br /> located www.dgs.ca.gov/BSC/Resources/Page-Content/Building-Standards-Commission-
<br /> Resources-List-Folder/CALGreen may be used to assist in documenting compliance with the waste
<br /> management plan.
<br />2. Mixed construction and demolition debris processors can be located at the California Department of
<br /> Resources Recycling and Recovery (CalRecycle).
<br />5.408.2 UNIVERSAL WASTE. [A] Additions and alterations to a building or tenant space that meet the scoping
<br />provisions in Section 301.3 for nonresidential additions and alterations, shall require verification that Universal Waste
<br />items such as fluorescent lamps and ballast and mercury containing thermostats as well as other California prohibited
<br />Universal Waste materials are disposed of properly and are diverted from landfills. A list of prohibited Universal Waste
<br />materials shall be included in the construction documents.
<br />Note: Refer to the Universal Waste Rule link at: http://www.dtsc.ca.gov/universalwaste/
<br />5.408.3 EXCAVATED SOIL AND LAND CLEARING DEBRIS. 100 percent of trees, stumps, rocks and associated
<br />vegetation and soils resulting primarily from land clearing shall be reused or recycled. For a phased project, such
<br />material may be stockpiled on site until the storage site is developed.
<br />Exception: Reuse, either on or off-site, of vegetation or soil contaminated by disease or pest infestation.
<br />Notes:
<br />1. If contamination by disease or pest infestation is suspected, contact the County Agricultural
<br /> Commissioner and follow its direction for recycling or disposal of the material.
<br />2. For a map of know pest and/or disease quarantine zones, consult with the California Department of
<br /> Food and Agriculture. (www.cdfa.ca.gov)
<br />SECTION 5.303 INDOOR WATER USE
<br />5.303.1 METERS. Separate submeters or metering devices shall be installed for the uses described in Sections
<br />503.1.1 and 503.1.2.
<br />5.303.1.1 Buildings in excess of 50,000 square feet. Separate submeters shall be installed as follows:
<br />1. For each individual leased, rented or other tenant space within the building projected to consume
<br /> more than 100 gal/day (380 L/day), including, but not limited to, spaces used for laundry or cleaners,
<br /> restaurant or food service, medical or dental office, laboratory, or beauty salon or barber shop.
<br />2. Where separate submeters for individual building tenants are unfeasible, for water supplied to the
<br /> following subsystems:
<br />a. Makeup water for cooling towers where flow through is greater than 500 gpm (30 L/s).
<br />b. Makeup water for evaporative coolers greater than 6 gpm (0.04 L/s).
<br />c. Steam and hot water boilers with energy input more than 500,000 Btu/h (147 kW).
<br />5.303.1.2 Excess consumption. A separate submeter or metering device shall be provided for any tenant
<br />within a new building or within an addition that is projected to consume more than 1,000 gal/day.
<br />SECTION 5.304 OUTDOOR WATER USE
<br />5.304.1 OUTDOOR POTABLE WATER USE IN LANDSCAPE AREAS. Nonresidential developments shall comply
<br />with a local water efficient landscape ordinance or the current California Department of Water Resources' Model Water
<br />Efficient Landscape Ordinance (MWELO), whichever is more stringent.
<br />Notes:
<br />1. The Model Water Efficient Landscape Ordinance (MWELO) is located in the California Code of Regulations,
<br /> Title 23, Chapter 2.7, Division 2.
<br />2. MWELO and supporting documents, including a water budget calculator, are available at:
<br /> https://www.water.ca.gov/.
<br />5.304.6 OUTDOOR POTABLE WATER USE IN LANDSCAPE AREAS. For public schools and community colleges,
<br />landscape projects as described in Sections 5.304.6.1 and 5.304.6.2 shall comply with the California Department of
<br />Water Resources Model Water Efficient Landscape Ordinance (MWELO) commencing with Section 490 of Chapter
<br />2.7, Division 2, Title 23, California Code of Regulations, except that the evapotranspiration adjustment factor (ETAF)
<br />shall be 0.65 with an additional water allowance for special landscape areas (SLA) of 0.35.
<br />Exception: Any project with an aggregate landscape area of 2,500 square feet or less may comply with the
<br /> prescriptive measures contained in Appendix D of the MWELO.
<br />5.304.6.1 Newly constructed landscapes. New construction projects with an aggregate landscape
<br /> area equal to or greater than 500 square feet.
<br />5.304.6.2 Rehabilitated landscapes. Rehabilitated landscape projects with an aggregate
<br /> landscape area equal to or greater than 1,200 square feet.
<br />5.303.4 COMMERCIAL KITCHEN EQUIPMENT.
<br />5.303.4.1 Food Waste Disposers. Disposers shall either modulate the use of water to no more than 1 gpm
<br />when the disposer is not in use (not actively grinding food waste/no-load) or shall automatically shut off after no
<br />more than 10 minutes of inactivity. Disposers shall use no more than 8 gpm of water.
<br />Note: This code section does not affect local jurisdiction authority to prohibit or require disposer
<br />installation.
<br />5.303.5 AREAS OF ADDITION OR ALTERATION. For those occupancies within the authority of the California
<br />Building Standards Commission as specified in Section 103, the provisions of Section 5.303.3 and 5.303.4 shall apply
<br />to new fixtures in additions or areas of alteration to the building.
<br />5.303.6 STANDARDS FOR PLUMBING FIXTURES AND FITTINGS. Plumbing fixtures and fittings shall be installed
<br />in accordance with the California Plumbing Code, and shall meet the applicable standards referenced in Table 1701.1
<br />of the California Plumbing Code and in Chapter 6 of this code.
<br />SECTION 5.402 DEFINITIONS
<br />5.402.1 DEFINITIONS. The following terms are defined in Chapter 2 (and are included here for reference)
<br />ADJUST. To regulate fluid flow rate and air patterns at the terminal equipment, such as to reduce fan speed or adjust
<br />a damper.
<br />SECTION 5.407 WATER RESISTANCE AND MOISTURE MANAGEMENT
<br />5.407.1 WEATHER PROTECTION. Provide a weather-resistant exterior wall and foundation envelope as required by
<br />California Building Code Section 1402.2 (Weather Protection), manufacturer's installation instructions or local
<br />ordinance, whichever is more stringent.
<br />5.407.2 MOISTURE CONTROL. Employ moisture control measures by the following methods.
<br />5.407.2.1 Sprinklers. Design and maintain landscape irrigation systems to prevent spray on structures.
<br />5.407.2.2 Entries and openings. Design exterior entries and/or openings subject to foot traffic or wind-driven
<br />rain to prevent water intrusion into buildings as follows:
<br />5.407.2.2.1 Exterior door protection. Primary exterior entries shall be covered to prevent water
<br />intrusion by using nonabsorbent floor and wall finishes within at least 2 feet around and perpendicular to
<br />such openings plus at least one of the following:
<br />1. An installed awning at least 4 feet in depth.
<br />2. The door is protected by a roof overhang at least 4 feet in depth.
<br />3. The door is recessed at least 4 feet.
<br />4. Other methods which provide equivalent protection.
<br />5.407.2.2.2 Flashing. Install flashings integrated with a drainage plane.
<br />5.303.3.3 Showerheads. [BSC-CG]
<br />5.303.3.3.1 Single showerhead. Showerheads shall have a maximum flow rate of not more than 1.8
<br />gallons per minute at 80 psi. Showerheads shall be certified to the performance criteria of the U.S. EPA
<br />WaterSense Specification for Showerheads.
<br />5.303.3.3.2 Multiple showerheads serving one shower. When a shower is served by more than one
<br />showerhead, the combined flow rate of all the showerheads and/or other shower outlets controlled by a
<br />single valve shall not exceed 1.8 gallons per minute at 80 psi, or the shower shall be designed to
<br />allow only one shower outlet to be in operation at a time.
<br />Note: A hand-held shower shall be considered a showerhead.
<br />5.303.3.4 Faucets and fountains.
<br />5.303.3.4.1 Nonresidential Lavatory faucets. Lavatory faucets shall have a maximum flow rate of not
<br />more than 0.5 gallons per minute at 60 psi.
<br />5.303.3.4.2 Kitchen faucets. Kitchen faucets shall have a maximum flow rate of not more than 1.8
<br />gallons per minute at 60 psi. Kitchen faucets may temporarily increase the flow above the maximum rate,
<br />but not to exceed 2.2 gallons per minute at 60 psi, and must default to a maximum flow rate of 1.8 gallons
<br />per minute at 60 psi.
<br />5.303.3.4.3 Wash fountains. Wash fountains shall have a maximum flow rate of not more than1.8
<br />gallons per minute/20 [rim space (inches) at 60 psi].
<br />5.303.3.4.4 Metering faucets. Metering faucets shall not deliver more than 0.20 gallons per cycle.
<br />5.303.3.4.5 Metering faucets for wash fountains. Metering faucets for wash fountains shall have a
<br />maximum flow rate of not more than 0.20 gallons per minute/20 [rim space (inches) at 60 psi].
<br />Note: Where complying faucets are unavailable, aerators or other means may be used to achieve
<br />reduction.
<br />5.303.3.4.6 Pre-rinse spray value
<br />When installed, shall meet the requirements in the California Code of Regulations, Title 20 (Appliance
<br />Efficiency Regulations), Section 1605.1 (h)(4) Table H-2, Section 1605.3 (h)(4)(A), and Section 1607
<br />(d)(7), and shall be equipped with an integral automatic shutoff.
<br />FOR REFERENCE ONLY:The following table and code section have been reprinted from the California
<br />Code of Regulations, Title 20 (Appliance Efficiency Regulations), Section 1605.1 (h)(4) and Section
<br />1605.3 (h)(4)(A).
<br />TABLE H-2
<br />STANDARDS FOR COMMERCIAL PRE-RINSE SPRAY
<br />VALUES MANUFACTURED ON OR AFTER JANUARY 28, 2019
<br />PRODUCT CLASS
<br />[spray force in ounce force (ozf)]MAXIMUM FLOW RATE (gpm)
<br />Product Class 1 (≤1.00
<br />Product Class 2 (> 5.0 ozf and ≤1.20
<br />Product Class 3 (> 8.0 ozf)1.28
<br />2022 CALIFORNIA GREEN BUILDING STANDARDS CODE
<br />NONRESIDENTIAL MANDATORY MEASURES, SHEET 2 (July 2024 Supplement)
<br />Y
<br />DIVISION 5.2 ENERGY EFFICIENCY
<br />SECTION 5.201 GENERAL
<br />5.201.1 Scope [BSC-CG]. California Energy Code [DSA-SS]. For the purposes of mandatory energy efficiency
<br />standards in this code, the California Energy Commission will continue to adopt mandatory building standards.
<br />DIVISION 5.3 WATER EFFICIENCY AND CONSERVATION
<br />SECTION 5.301 GENERAL
<br />5.301.1 Scope. The provisions of this chapter shall establish the means of conserving water use indoors, outdoors
<br />and in wastewater conveyance.
<br />SECTION 5.302 DEFINITIONS
<br />5.302.1 Definitions. The following terms are defined in Chapter 2 (and are included here for reference)
<br />EVAPOTRANSPIRATION ADJUSTMENT FACTOR (ETAF) [DSA-SS]. An adjustment factor when applied to
<br />reference evapotranspiration that adjusts for plant factors and irrigation efficiency, which ae two major influences on
<br />the amount of water that needs to be applied to the landscape.
<br />FOOTPRINT AREA [DSA-SS]. The total area of the furthest exterior wall of the structure projected to natural grade,
<br />not including exterior areas such as stairs, covered walkways, patios and decks.
<br />METERING FAUCET. A self-closing faucet that dispenses a specific volume of water for each actuation cycle. The
<br />volume or cycle duration can be fixed or adjustable.
<br />GRAYWATER. Pursuant to Health and Safety Code Section 17922.12, "graywater" means untreated wastewater that
<br />has not been contaminated by any toilet discharge, has not been affected by infectious, contaminated, or unhealthy
<br />bodily wastes, and does not present a threat from contamination by unhealthful processing, manufacturing, or
<br />operating wastes. "Graywater" includes, but is not limited to wastewater from bathtubs, showers, bathroom
<br />washbasins, clothes washing machines and laundry tubs, but does not include waste water from kitchen sinks or
<br />dishwashers.
<br />MODEL WATER EFFICIENT LANDSCAPE ORDINANCE (MWELO). The California ordinance regulating landscape
<br />design, installation and maintenance practices that will ensure commercial, multifamily and other developer installed
<br />landscapes greater than 2500 square feet meet an irrigation water budget developed based on landscaped area and
<br />climatological parameters.
<br />MODEL WATER EFFICIENT LANDSCAPE ORDINANCE (MWELO). [HCD] The California model ordinance
<br />(California Code of Regulations, Title 23, Division 2, Chapter 2.7), regulating landscape design, installation and
<br />maintenance practices. Local agencies are required to adopt the updated MWELO, or adopt a local ordinance at least
<br />as effective as the MWELO.
<br />POTABLE WATER. Water that is drinkable and meets the U.S. Environmental Protection Agency (EPA) Drinking
<br />Water Standards. See definition in the California Plumbing Code, Part 5.
<br />POTABLE WATER. [HCD] Water that is satisfactory for drinking, culinary, and domestic purposes, and meets the
<br />U.S. Environmental Protection Agency (EPA) Drinking Water Standards and the requirements of the Health Authority
<br />Having Jurisdiction.
<br />RECYCLED WATER. Water which, as a result of treatment of waste, is suitable for a direct beneficial use or a
<br />controlled use that would not otherwise occur [Water Code Section 13050 (n)]. Simply put, recycled water is water
<br />treated to remove waste matter attaining a quality that is suitable to use the water again.
<br />SUBMETER. [HCD 1] A secondary device beyond a meter that measures water consumption of an individual rental
<br />unit within a multiunit residential structure or mixed-use residential and commercial structure. (See Civic Code Section
<br />1954.202 (g) and Water code Section 517 for additional details.)
<br />WATER BUDGET. Is the estimated total landscape irrigation water use which shall not exceed the maximum applied
<br />water allowance calculated in accordance with the Department of Water Resources Model Efficient Landscape
<br />Ordinance (MWELO).
<br />5.106.5.6.5 Requirement to install EVSE. Level 2 EVSE shall be provided in all existing EV capable spaces to
<br />create EVCS when a project is required by California Administrative Code Section 4-309 to be submitted for plan
<br />approval to the Division of the State Architect. When EVSE is installed in existing EV capable spaces, accessible
<br />EVCS shall be provided in accordance with California Building Code Chapter 11B.
<br />Exception: Projects in which improvements in parking areas consist only of accessibility improvements are
<br />not required to comply with Section 5.106.5.6.5.
<br />5.106.8 LIGHT POLLUTION REDUCTION. [N]. l Outdoor lighting systems shall be designed and installed to comply
<br />with the following:
<br />1.The minimum requirements in the California Energy Code for Lighting Zones 0-4 as defined in Chapter 10,
<br />Section 10-114 of the California Administrative Code; and
<br />2.Backlight (B) ratings as defined in IES TM-15-11 (shown in Table A-1 in Chapter 8);
<br />3.Uplight and Glare ratings as defined in California Energy Code (shown in Tables 130.2-A and 130.2-B in
<br />Chapter 8) and
<br />4.Allowable BUG ratings not exceeding those shown in Table 5.106.8, [N] or Comply with a local ordinance
<br />lawfully enacted pursuant to Section 101.7, whichever is more stringent.
<br />Exceptions: [N]
<br />1. Luminaires that qualify as exceptions in Sections 130.2 (b) and 140.7 of the California Energy Code.
<br />2. Emergency lighting.
<br />3. Building facade meeting the requirements in Table 140.7-B of the California Energy Code, Part 6.
<br />4. Custom lighting features as allowed by the local enforcing agency, as permitted by Section 101.8
<br /> Alternate materials, designs and methods of construction.
<br />5. Luminaires with less than 6,200 initial luminaire lumens.
<br />TABLE 5.106.8 [N] MAXIMUM ALLOWABLE BACKLIGHT,
<br />UPLIGHT AND GLARE (BUG) RATINGS 1,2
<br /> ALLOWABLE RATING
<br />LIGHTING
<br />ZONE
<br />LZ0
<br />LIGHTING
<br />ZONE LZ1
<br />LIGHTING
<br />ZONE LZ2
<br />LIGHTING
<br />ZONE LZ3
<br />LIGHTING
<br />ZONE LZ4
<br />MAXIMUM ALLOWABLE
<br />BACKLIGHT RATING 3
<br />Luminaire greater than 2
<br />mounting heights (MH) from
<br />property line
<br />N/A No Limit No Limit No Limit No Limit
<br />Luminaire back hemisphere is
<br />1-2 MH from property line N/A B2 B3 B4 B4
<br />Luminaire back hemisphere is
<br />0.5-1 MH from property line N/A B1 B2 B3 B3
<br />Luminaire back hemisphere is
<br />less than 0.5 MH from property
<br />line
<br />N/A B0 B0 B1 B2
<br />MAXIMUM ALLOWABLE
<br />UPLIGHT RATING (U)
<br />For area lighting 3 N/A U0 U0 U0 U0
<br />For all other outdoor
<br />lighting,including decorative
<br />luminaires
<br />N/A U1 U2 U3 UR
<br />DISCLAIMER:THIS DOCUMENT IS PROVIDED AND INTENDED TO BE USED AS A MEANS TO INDICATE AREAS OF COMPLIANCE WITH THE CALIFORNIA GREEN BUILDING STANDARDS (CALGREEN) CODE. DUE TO THE VARIABLES BETWEEN BUILDING DEPARTMENT JURISDICTIONS, THIS CHECKLIST IS TO BE USED ON AN INDIVIDUA
<br />L
<br />
<br />P
<br />R
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />B
<br />A
<br />S
<br />I
<br />S
<br />
<br />A
<br />N
<br />D
<br />
<br />M
<br />A
<br />Y
<br />
<br />B
<br />E
<br />
<br />M
<br />O
<br />D
<br />I
<br />F
<br />I
<br />E
<br />D
<br />
<br />B
<br />Y
<br />
<br />T
<br />H
<br />E
<br />
<br />E
<br />N
<br />D
<br />
<br />U
<br />S
<br />E
<br />R
<br />
<br />T
<br />O
<br />
<br />M
<br />E
<br />E
<br />T
<br />
<br />T
<br />H
<br />O
<br />S
<br />E
<br />
<br />I
<br />N
<br />D
<br />I
<br />V
<br />I
<br />D
<br />U
<br />A
<br />L
<br />
<br />N
<br />E
<br />E
<br />D
<br />S
<br />.
<br />
<br />
<br />T
<br />H
<br />E
<br />
<br />E
<br />N
<br />D
<br />
<br />U
<br />S
<br />E
<br />R
<br />
<br />A
<br />S
<br />S
<br />U
<br />M
<br />E
<br />S
<br />
<br />A
<br />L
<br />L
<br />
<br />R
<br />E
<br />S
<br />P
<br />O
<br />N
<br />S
<br />I
<br />B
<br />I
<br />L
<br />I
<br />T
<br />Y
<br />
<br />A
<br />S
<br />S
<br />O
<br />C
<br />I
<br />A
<br />T
<br />E
<br />D
<br />
<br />W
<br />I
<br />T
<br />H
<br />
<br />T
<br />H
<br />E
<br />
<br />U
<br />S
<br />E
<br />
<br />O
<br />F
<br />
<br />T
<br />H
<br />I
<br />S
<br />
<br />D
<br />O
<br />C
<br />U
<br />M
<br />E
<br />N
<br />T
<br />,
<br />
<br />I
<br />N
<br />C
<br />L
<br />U
<br />D
<br />I
<br />N
<br />G
<br />
<br />V
<br />E
<br />R
<br />I
<br />F
<br />I
<br />C
<br />A
<br />T
<br />I
<br />O
<br />N
<br />
<br />W
<br />I
<br />T
<br />H
<br />
<br />T
<br />H
<br />E
<br />
<br />F
<br />U
<br />L
<br />L
<br />
<br />C
<br />O
<br />D
<br />E
<br />.
<br />N/A Y N/A Y N/A Y N/A
<br />Y = YES
<br />N/A =NOT APPLICABLE
<br />RESPON. PARTY =RESPONSIBLE PARTY (ie: ARCHITECT, ENGINEER,
<br />OWNER, CONTRACTOR, INSPECTOR ETC.)
<br />RESPON.
<br />PARTY
<br />RESPON.
<br />PARTY
<br />RESPON.
<br />PARTY
<br />RESPON.
<br />PARTY
<br />MAXIMUM ALLOWABLE
<br />GLARE RATING 5 (G)
<br />MAXIMUM ALLOWABLE
<br />GLARE RATING 5 (G)N/A G1 G2 G3 G4
<br />MAXIMUM ALLOWABLE
<br />GLARE RATING 5 (G)N/A G0 G1 G1 G2
<br />MAXIMUM ALLOWABLE
<br />GLARE RATING 5 (G)N/A G0 G0 G1 G1
<br />MAXIMUM ALLOWABLE
<br />GLARE RATING 5 (G)N/A G0 G0 G0 G1
<br />1. IESNA Lighting Zones 0 and 5 are not applicable; refer to Lighting Zones as defined in the California
<br />Energy Code and Chapter 10 of the Callifornia Administrative Code.
<br />2. For property lines that abut public walkways, bikeways, plazas and parking lots, the property line may be
<br />considered to be 5 feet beyond the actual property line for purpose of determining compliance with this
<br />section. For property lines that abut public roadways and public transit corridors, the property line may be
<br />considered to be the centerline of the public roadway or public transit corridor for the purpose of determining
<br />compliance with this section.
<br />3. General lighting luminaires in areas such as outdoor parking, sales or storage lots shall meet these
<br />reduced ratings. Decorative luminaries located in these areas shall meet U -value limits for "all other outdoor
<br />lighting"
<br />TABLE 5.106.5.6.3
<br />NUMBER OF PARKING SPACES
<br />IN A PARKING FACILITY
<br />MINIMUM TOTAL POWER (KVA)
<br />REQUIRED FOR EVCS
<br />0-9 0
<br />10-25 7
<br />26-50 14
<br />51-75 20
<br />76-100 27
<br />101-150 40
<br />151-200 60
<br />201 AND OVER
<br />Total required KVA = P × .05 × 6.6
<br />Where P = Parking spaces in facility
<br />5.106.5.6.4 EVCS for alterations of or additions to parking facilities. Alterations of or additions to parking
<br />facilities shall provide EVCS in compliance with Section 5.106.5.6.4. The installation of infrastructure for EV capable
<br />spaces required to be provided without EVSE shall not be required.
<br />5.106.5.6.4.1 Alterations of and additions to parking facilities. EVCS shall be provided in accordance with
<br />the number indicated in Table 5.106.5.6.1 or minimum power indicated in Table 5.106.5.6.3 when the scope
<br />of work includes an increase in power supply to an electric panel serving light fixtures illuminating the parking
<br />area or when area containing parking spaces is added to a parking facility. The number of required EVCS
<br />shall be based on the total number of existing and new parking spaces in the parking facility.
<br />5.106.5.6.4.2 Alterations consisting of the installation of photovoltaic systems. EVCS shall be provided
<br />in accordance with the number indicated in Table 5.106.5.6.1 or maximum power indicated in Table
<br />5.106.5.6.3 when a new photovoltaic system is installed in an existing parking facility.
<br />SECTION 5.409 LIFE CYCLE ASSESSMENT
<br />5.409.1 SCOPE. [BSC-CG] Effective July 1, 2024, projects consisting of newly constructed building(s) with a
<br />combined floor area of 100,000 square feet or greater shall comply with either Section 5.409.2 or Section 5.409.3.
<br />Alteration(s) to existing building(s) where the combined altered floor area is 100,000 square feet or greater shall
<br />comply with either Section 5.105.2, 5.409.2, or 5.409.3. Addition(s) to existing building(s) where the total floor area
<br />combined with the existing building(s) is 100,000 square feet or greater shall comply with either Section 5.105.2,
<br />Section 5.409.2, or Section 5.409.3. Effective January 1, 2026, the combined floor area shall be 50,000 square feet or
<br />greater.
<br />[DSA-SS] Projects consisting of newly constructed building(s) with a combined floor area of 50,000 square feet or
<br />greater shall comply with either Section 5.409.2 or Section 5.409.3. Alteration(s) to existing building(s) where the
<br />combined altered floor area is 50,000 square feet or greater shall comply with either Section 5.105.2, 5.409.2, or
<br />5.409.3. Addition(s) to existing building(s) where the total floor area combined with the existing building(s) is 50,000
<br />square feet or greater shall comply with either Section 5.105.2, Section 5.409.2, or Section 5.409.3.
<br />5.106.10 GRADING AND PAVING. Construction plans shall indicate how site grading or a drainage system will
<br />manage all surface water flows to keep water from entering buildings. Examples of methods to manage surface
<br />water include, but are not limited to, the following:
<br />1.Swales.
<br />2.Water collection and disposal systems.
<br />3.French drains.
<br />4.Water retention gardens.
<br />5.Other water measures which keep surface water away from buildings and aid in groundwater recharge.
<br />Exception: Additions and alterations not altering the drainage path.
<br />5.106.12 SHADE TREES [DSA-SS]. Shade Trees shall be planted to comply with Sections 5.106.12.1, 5.106.12.2,
<br />and 5.106.12.3. Percentages shown shall be measured at noon on the summer solstice. Landscape irrigation
<br />necessary to establish and maintain tree health shall comply with Section 5.304.6.
<br />5.106.12.1 Surface parking areas. Shade tree plantings, minimum #10 container size or equal, shall be installed
<br />to provide shade over 50 percent of the parking area within 15 years.
<br />Exceptions: Surface parking area covered by solar photovoltaic shade structures with roofing
<br />materials that comply with Table A5.106.11.2.2 in Appendix A5 shall be permitted in whole or in part in
<br />lieu of shade tree planting.
<br />5.106.12.2 Landscape areas. Shade tress plantings, minimum #10 container size or equal shall be installed to
<br />provide shade of 20% of the landscape area within 15 years.
<br />Exceptions: Playfields for organized sport activity are not included in the total area calculation.
<br />5.106.12.3. Hardscape areas. Shade tree plantings, minimum #10 container size or equal shall be installed to
<br />provide shade over 20 percent of the hardscape area within 15 years.
<br />Exceptions:
<br />1.Walks, hardscape areas covered by solar photovoltaic shade structures or shade structures with roofing
<br />materials that comply with Table A5.106.11.2.2 in Appendix A5 shall be permitted in whole or in part in lieu
<br />of shade tree planting.
<br />2.Designated and marked play areas of organized sport activity are not included in the total area calculation.
<br />BALANCE. To proportion flows within the distribution system, including sub-mains, branches and terminals,
<br />according to design quantities.
<br />BUILDING COMMISSIONING. A systematic quality assurance process that spans the entire design and construction
<br />process, including verifying and documenting that building systems and components are planned, designed, installed,
<br />tested, operated and maintained to meet the owner’s project requirements.
<br />BUY CLEAN CALIFORNIA ACT (BCCA). The Buy Clean California Act (BCCA) (Public Contract Code Sections
<br />3500-3505) targets carbon emissions associated with the production of structural steel (hot-rolled sections, hollow
<br />structural sections, and plate), concrete reinforcing steel, flat glass, and mineral wool board insulation. The maximum
<br />acceptable global warming potential (GWP) limits are established by the Department of General Services (DGS), in
<br />consultation with the California Air Resources Board (CARB).
<br />CRADLE-TO-GRAVE. Activities associated with a product or building’s life cycle from the extraction stage through
<br />disposal stage, and covering modules A1 through C4 in accordance with ISO Standards 14025 and 21930.
<br />ORGANIC WASTE. Food waste, green waste, landscape and pruning wste, nonhazardous wood waste, and food
<br />soiled paper waste that is mixed in with food waste.
<br />REFERENCE STUDY PERIOD. The period of use for the building, in years, that will be assumed for life cycle
<br />assessment.
<br />TEST. A procedure to determine quantitative performance of a system or equipment
<br />TYPE III ENVIRONMENTAL PRODUCT DECLARATION (EPD). A third-party verified report that summarizes how a
<br />product impacts the environment. Type III EPDs can be either product-specific, factory-specific, or industry-wide EPDs.
<br />See “Cradle-to-Gate.”
<br />FACTORY-SPECIFIC EPD. A product-specific Type III EPD in which the environmental impacts can be
<br />attributed to a single manufacturer and manufacturing facility.
<br />INDUSTRY-WIDE EPD (IW-EPD). A Type III EPD in which the environmental impacts are an average of the
<br />typical manufacturing impacts for a range of products within the same product category for a group of
<br />manufacturers.
<br />PRODUCT-SPECIFIC EPD. A Type III EPD in which the environmental impacts can be attributed to a product
<br />design and manufacturer across multiple facilities.
<br />5.303.3 WATER CONSERVING PLUMBING FIXTURES AND FITTINGS. Plumbing fixtures (water closets and
<br />urinals) and fittings (faucets and showerheads) shall comply with the following:
<br />5.303.3.1 Water Closets. The effective flush volume of all water closets shall not exceed 1.28 gallons per
<br />flush. Tank-type water closets shall be certified to the performance criteria of the U.S. EPA WaterSense
<br />Specification for Tank-Type toilets.
<br />Note: The effective flush volume of dual flush toilets is defined as the composite, average flush volume of
<br />two reduced flushes and one full flush.
<br />5.303.3.2 Urinals.
<br />5.303.3.2.1 Wall-mounted Urinals. The effective flush volume of wall-mounted urinals shall not exceed
<br />0.125 gallons per flush.
<br />5.303.3.2.2 Floor-mounted Urinals. The effective flush volume of floor-mounted or other urinals shall
<br />not exceed 0.5 gallons per flush.
<br />5.303.3.3 Showerheads. [BSC-CG]
<br />5.303.3.3.1 Single showerhead. Showerheads shall have a maximum flow rate of not more than 1.8
<br />gallons per minute at 80 psi. Showerheads shall be certified to the performance criteria of the U.S. EPA
<br />WaterSense Specification for Showerheads.
<br />5.303.3.3.2 Multiple showerheads serving one shower. When a shower is served by more than one
<br />showerhead, the combined flow rate of all the showerheads and/or other shower outlets controlled by a
<br />single valve shall not exceed 1.8 gallons per minute at 80 psi, or the shower shall be designed to
<br />allow only one shower outlet to be in operation at a time.
<br />Note: A hand-held shower shall be considered a showerhead.
<br /> 5.106.8.1 Facing- Backlight
<br />Luminaries within 2MH of a property line shall be oriented so that the nearest property line is behind the fixture,
<br />and shall comply with the backlight rating specified in Table 5.106.8 based on the lighting zone and distance to
<br />the nearest point of that property line.
<br />Exception: Corners. If two property lines (or two segments of the same property line) have equidistant point
<br />to the luminaire, then the luminaire may be oriented so that the intersection of the two lines (the corner) is
<br />directly behind the luminaire. The luminaire shall still use the distance to the nearest points(s) on the property
<br />lines to determine the required backlight rating.
<br />5.106.8.2 Facing-Glare.
<br />For luminaires covered by 5.106.8.1, if a property line also exists within or extends into the front hemisphere
<br />within 2MH of the luminaire then the luminaire shall comply with the more stringent glare rating specified in
<br />Table 5.106.8 based on the lighting zone and distance to the nearest point on the nearest property line within
<br />the front hemisphere.
<br />Note: [N]
<br /> 1.See also California Building Code, Chapter 12, Section 1205.6 for college campus lighting requirements for
<br />parking facilities and walkways.
<br /> 2.Refer to Chapter 8 (Compliance Forms, Worksheets and Reference Material) for IES TM-15-11 Table
<br />A-1, California Energy Code Tables 130.2-A and 130.2-B.
<br /> 3. Refer to the California Building Code for requirements for additions and alterations.
<br />5.106.5.6.2.1 Reduced number of EV capable spaces. The installation of each DCFC EVSE shall be
<br />permitted to reduce the minimum number of required EV capable spaces indicated in Table 5.106.5.6.1
<br />by five and reduce proportionally the required electrical load capacity to the service panel or subpanel.
<br />5.106.5.6.2.2 Multiple connectors. EVSE with multiple vehicle connectors capable of charging multiple
<br />EVs simultaneously shall be permitted if the electrical load capacity required by Section 5.106.5.6.1 for
<br />each EV capable space is accumulatively supplied to the EVSE.
<br />5.106.5.6.2.3 Use of automatic load management systems (ALMS). ALMS shall be permitted for
<br />EVCS installed in accordance with Section 5.105.5.6.2. When ALMS is installed, the required electrical
<br />load capacity specified in Section 5.106.5.6.1 for each EVCS may be reduced when serviced by an
<br />EVSE controlled by an ALMS. Each EVSE controlled by an ALMS shall deliver a minimum 30 amperes
<br />to an EV when charging one vehicle and shall deliver a minimum 3.3 kW while simultaneously charging
<br />multiple EVs.
<br />5.106.5.6.3 EVCS alternative compliance. In lieu of compliance with Section 5.106.5.6.2, EVCS shall be
<br />provided with Level 1, low power Level 2, or Level 2, or any combination of Level 1, low power Level 2 or
<br />Level 2 EVSE such that the total power supplied by the combination of EVSE meets the minimum power
<br />indicated in Table 5.106.5.6.3, based on the total number of actual parking spaces in each parking facility.
<br />1"12"0
<br />PROPRIETARY AND CONFIDENTIAL
<br />ABCDEFGH
<br />1
<br />2
<br />3
<br />4
<br />5
<br />6
<br />DATENO.REVISIONORIGINAL SIZE 24"X36"
<br />SHEET SIZE ARCH "D"
<br />3500 DEER CREEK RD.
<br />PALO ALTO, CA 94304
<br />(650) 681-5000
<br />3/27/2024AARCH SITE PLAN COMMENTS10/18/2024BCIVIL AND BUILDING COMMENTS14700 THORNTON RDLODI, CA 95242, USCALGREEN
<br />CHECKLIST
<br />G-004
<br />REV: B IFP
<br />MVANDERWALPLOT DATE: 10/25/2024 9:21 a. m.
<br />JB-9528024TESLA SUPERCHARGER_LODI, CAPHASE 1: 16 SUPERCHARGERSB
|