Laserfiche WebLink
RECEIVED <br /> I811N 12 2016 <br /> T <br /> IV. Evacuation Route and AssemblyArea Ma /First Aid <br /> LTH DEPARTMENT <br /> A. Evacuation Routes and Maps <br /> The evacuation routes and assembly area maps are posted by <br /> every main exit. Employees are to become familiar with all <br /> evacuation routes and their assembly point. See Attachment B for <br /> the general evacuation plan and designated meeting locations. <br /> B. Location of First Aid Kits <br /> As noted on Attachment C, the First Aid Kits are located along the <br /> north wall (3) on the south wall and in the fumigation shed. <br /> C. Designated Meeting Locations <br /> Once employees have evacuated the facility, they must meet in the <br /> parking lot or on the west side of the building to check-in with the <br /> emergency responders who will be accounting for individuals. <br /> Those employees who do not show up to the designated meeting <br /> location will be presumed to still be in the building and fire and <br /> police personnel shall be notified of their absence immediately. <br /> The designated meeting locations are shown in Attachment B. <br /> D. Procedures for Critical Plant Operations <br /> The operation of this facility does not require individuals to block, <br /> isolate, or secure contents that may result in further harm to the <br /> occupants of the facility. Therefore procedures are not necessary <br /> for those who may need to operate critical plant operations during <br /> an evacuation. At the discretion of the Maintenance Manager or <br /> higher authority, the utilities (natural gas, electricity and water) may <br /> be turned off. The Maintenance Manager will instruct the <br /> maintenance workers on how to turn off those services. Locations <br /> of the utility shut-offs are shown in Attachment D. <br /> V. Fire Emergency Procedures <br /> a. Remove anyone in immediate danger. <br /> b. Once an employee is alerted to the fire danger, he/she will go to the <br /> nearest exit, activate the fire alarm (if present), exit the building <br /> according to the emergency action plan, and proceed directly to the <br /> designated assembly point. <br /> c. Confine the fire to the room/area by closing the door to the area <br /> where the fire is located and by ensuring all doors leading to main <br /> hallways are closed. <br /> 5 <br />