Laserfiche WebLink
0 0 <br /> G. Inert absorbent material should first be sprinkled around the spill to <br /> surround it and prevent it from spreading. Then the spill absorbent <br /> material should be sprinkled over the entire spill until it is covered and <br /> looks dry. ill and <br /> For locations of absorbent material, please refer to Section C, ,Sp <br /> Safety Equipment'. absorbent <br /> H. Under the direction of an emergency coordinator, sweep up <br /> material and dispose in a drum for waste disposal. <br /> I. Authorized personnel will perform the following: <br /> 1. Store the drum in a safe, secure location such that the public does <br /> not become exposed; away from air conditioning intake points and <br /> lanes of traffic. Keep away from sources of ignition.the drums pr the <br /> rly <br /> filled out waste labels to drums and place <br /> Hazardous Waste Storage Area. <br /> 2. Call a qualified chemical disposal <br /> RCRAI company <br /> CFR, remove te Californha dTi e rum t 22 <br /> disposal site meeting <br /> regulations, etc. appropriate corrective <br /> 3. Fill out required internal reports and take appro p <br /> action to eliminate such a hazard from occurring in the future. <br /> 4. If the spill is reportable, an emergency coordinator will refer to the <br /> Notification Procedures. <br /> Contingency Plan <br /> 500 South Beckman Road 11.18 <br /> ArmorStruxx, LLC Lodi, CA 95240 <br /> March 2013 <br />