COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

Page 4 of 8 0///r 6. PIPING SUMP TESTING Test Method Developed By: L) Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer ❑Other(Specify) Test Method Used: ❑ Pressure ❑Vacuum ❑Hydrostatic ❑ Other(Specify) Test Equipment Used: Equipment Resolution: Sump Sump Sump Sump Sump Diameter: Sump Depth: Sump Material: Height from Tank Top to Top of Hi hest Pi in Penetration: Height from Tank Top to Lowest Electrical Penetration: Condition of sump prior to testing: Portion of Sump Tested' Does turbine shut down when sump sensor detects liquid(both product and ❑Yes ❑ No 13 NA ❑ Yes El No 13 NA E3 Yes ❑ No ❑ NA ❑ Yes El No E3 NA water?' Turbine shutdown response time Is system programmed for fail-safe ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?' Was fail-safe verified to be ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA o erational?' Wait time between applying pressurelvacuumlwater and starting test: Test Start Time: Initial Reading ft): Test End Time: Final Reading(RF): Test Duration: Change in Reading(RF-Ri): PasslFail Threshold or Criteria: Test Basalt: ❑ Pass E3 Fail L) Pass Ll Fail Ll Pass G Fail ❑ Pass L) Fail Was sensor removed for testing? ❑ Yes L3No ElNA ❑ Yes LlNo L3NA ❑ Yes ❑ No ❑ NA ❑Yes L3No ❑ NA Was sensor properly replaced after E3 Yes ❑ No ❑ NA E3Yes E3No E3NA E3Yes 13No E3NA F0Yes ❑ No E3 NA testing? Comments— include information on repairs made prior to testing, and recommended follow-up for failed tests If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)