COMPLIANCE INFO_2015 - 2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 6. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Page 14 of 4— I est method Developed I3y: UDC Manufacturer x Industry Standard ❑ Professional Engineer Other (Spec) Test Method Used: ❑ Pressure Vacuum x Hydrostatic ❑ Other (Spec) Test Equipment Used: Incon TS -STS UDC #1/2 UDC #3/4 Equipment Resolution:.001" UDC #2-3 Satellite UDC #1 Satellite UDC Manufacturer: Bravo Bravo Bravo Bravo UDC Material: FRP FRP FRP Poly UDC Depth: 30" 30" 30" 30" Height from UDC Bottom to Top of Highest Piping Penetration: 12" 12" 10" 10" Height from UDC Bottom to] Lowest Electrical Penetration: 0" 10" 0" 0" Condition of UDC prior to testing: Clean Clean Clean Clean Portion of UDC Tested' 1 /2 1/2 1/2 Does turbine shut down when UDC sensor detects liquid (both product and water)?' X Yes ❑ No ❑ NA X Yes No -- NA XYes y No NA —1/2 X Yes _— No --'NA Turbine shutdown response time 3 sec 3 Sec. 3 sec. 3 sec. Is system programmed for fail- safe shutdown?* X Yes ❑ No C NA X Yes _— No ❑ NA X_ Yes _ No ❑ NA X Yes ❑ No C NA Was fail-safe verified to be operational?* X Yes ❑ No ❑ NA X Yes '--No ❑ NA XYes ❑ No C NA X Yes ❑ No NA Wait time between applying pressure/vacuum/water and starting test 15 min. 15 Min. 15 Min. 15 Min. Test Start Time: 12:03 12:03 12:03 12:03 Initial Reading (111): 7.228 3.904 2.619 5.572 Test End Time: 12:18 12:18 12:18 12:18 Final Reading (RF): 7.228 3.904 2.619 5.573 Test Duration: 15 Min 15 Min. 15 Min. 15 Min. Change in Reading (RF-Ri): 0.00 0.000 0.000 0.001 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: X Pass ❑ Fail X Pass ❑ Fail X Pass ❑ Fail X Pass ❑ Fail Was sensor removed for testing? X Yes ❑ No ❑ NA XYes 7 No —INA X Yes ---No = NA X Yes ❑ No r' NA [�W�ais_se_nsor properly replaced andfied functional after testin ? XYes ❑ No NA XYes ❑ No NA XYes ❑ No NA XYes ❑ No - NA Comments — (include information on repairs made prior to testing and recommended follow-up for jailed tests) ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to a� of the questions indicated with an asterisk(*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)