Laserfiche WebLink
E. Ocher types of tank <br /> (1) Chemical composition of material stored is provided. <br /> (2) Chemical abstract service number (CAS#) <br /> 14. Overflow protection systems (detail drawing of spill catchment basin(s)/piping sump(s) required, including tank fill and all <br /> openings). [Section 2635 (b) (8)] <br /> Z� A. Spill catchment basin. <br /> Capacity: 6- <br /> Type: .5a-c-- -- <br /> B. Manual monitoring (motor vehicle fuels only). <br /> (1) Written fitting procedure: [Section 2635 (9) (A) (B) (C)] <br /> (a) Tank volume capacity is at 103% or +200 gallons. <br /> _ (b) Metered product entering UST and tank capacity <br /> ,��, determined immediately prior to filling. <br /> `[ -0 C. Mechanical/Electronic monitoring (mandatory for ran-motor vehicle fuel tanks) [Section 2635 (8) (A) (B) (C)] <br /> —� (1) Level sensing device and #2 or #3 below. <br /> �^ (2) Audible/visual alarm triggered by a liquid level sensor. <br /> (3) Automatic shut-off. <br /> 15. Double-walled tank and system allow for monitoring of the annular space. <br /> [Section 2635 (8) (A) (B) (C)] <br /> A. Release from 10 container designed to drain to a specific location within the annular space to be detected by <br /> a monitoring device or method. <br /> ✓� B. Continuous electronic monitoring connected to audible/visual alarm system. <br /> Q C. Type of Detectors (Detail of monitoring equipment as installed). <br /> (1) Brand Name: r'L S <br /> _ (2) Model Number: <br /> (3) Sensor Type: Vapor _K Liquid both. <br /> (4) Sensor Specification. <br /> (5) Brochures provided. <br /> (6) Manufacturer's written instaLtati on instructions. <br /> (7) Location of probe or: <br /> (tank): (piping): <br /> 16. Any special accessories, fittings, coatings, or linings not inherent within the initial design of the 10 tank or double- <br /> wall UST. [Section 2631 (r)] <br /> A. Approved by a nationally recognized independent testing organization. <br /> a. Demonstration of integrity with the 10 tank or double walled UST. <br /> 17. Tanks subject to floatation. [Section 2631 (s)] <br /> A. Anchored by deadman or slab. <br /> B. Anchors to be installed as specified by manufacturer. <br /> C. installation details provided on plans. <br /> _ D. Calcu.ations provided. <br /> 18. Fiber Liners between tank(s) and excavation to prevent infiltration of native soil into backfill material. <br /> 5 <br />