COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

FEB 2 5 2016 MON TUE WED THUR FRI SAT SUN rTEM HFA!yy nco3PTP.i1-_KlT 0 N D N D N D N D N D D r M, rank .1/ Product Loading Hoses - Visually Inspect for wear, damage corrosion, kinks drips and leaks Ensure hoses are cleady marked with riser number and product Service r Vy Dry Break Couplers - Visually inspect for damage, corrosion, proper orientation (observe hookup to vehicle cry break), abnormal drip -5, leaks Ensure gaskets are In place and in good condition Ensure handles and pins are in good condition. Product Hose Swivels -Look /or drips and leaks- Make sure swivels move freely and easily Counterweights - Visually inspect the counterweight for damage or corrosion. Move the loading arm and check ease of movement and balance Vapor Hoses - Visually inspect for damage and vapor leaks. Ensure there is no product in the hose Make sure gaskets are in place and are in good condition. Vapor Couplers - Ensure gaskets are In place and in good condition Make sure plunger is present to push in tanker Make sure ears and are in good condition poppet on pins Vr Vapor Hose Swivel Joints -0sually inspect for damage, drips and leaks Ensure swivels move freely and easily, proper operation. full, smooth movement of the loading arm Producl./Vapor Valves& Plping/Support3 -Visually inspect for drips and leaks, particularly at connection points and flanges. Look for signs of damage and/or corrosion. Ensure piping is clearly labeled with product service and flow direction Turbine Meter - Visually inspect the turbine meterforleaking at flanges, pruperoperation (e g melercount) Control Valve - Visuallyinspect the control valve fordamage, leaking at flanges pruperoperation controlled opening and closing Drain boxes/pump orf systemsibuckets - Ensure boxes and buckets are empty Make sure pump oil system ✓ hose and fittings are in good condition and gaskets are present and in good condition Ensure there are no air leaks. V"' ✓ j Drains -Ensure all drains sit- clear of debris that could Inhibit flow or cause clogging. Locks and Seals — Ensure all locks end seals am in place on the meters, pre -amp housings and valves Meat Sensors - Ensure the sensors are present and show no obvious signs of damage Emergency Shutdown (ESD) - Ensure the ESD is clearly Identified and labeled and there are no obstructions that would prevent access. Signage - Ensure loading procedures and current version of the Product Loading Sequence Chart (PLSC) are present and in good condition. Lights - Ensure they are present and show no obvious signs of damage Ensure they turn on and ofT at the correct times to provide sufficient lighting. Canopy Rain Gutters - Ensure they am securely fastened and Show no obvious signs of damage Make sure directing areas that could cause injury or equipment damage the downspouts am nor waterinto Video Cameras - Ensure they are present and show no obvious signs of damage Check monitor inside to to ✓ ensure they are worlding property, are in focus and am adjusted provide maximum viewing Intercoms - Ensure they are present and show no obvious signs of damage Eye Wash Stations - Ensure eye wash stations are clearly identified and labeled and them are no obstructions that would prevent access. L/ Emergency Shower - Ensure shower is clearly Identified and labeled and there are no obstructions that would prevent access. Deeco Screens -Ensum the screen is on and legible and shows no signs of damage Ensure enclosure is locked. SOL Room Ensure cleanliness. verity printer paper available for SOL and journey plan printers, ensure RACS cabinet is locked lHousekesping - Pick up all trash and debris Empty trash cans