Laserfiche WebLink
Item Task Status Comments <br /> 5.5 Strainer b.Access strainer I Yes I INo* I jN/A <br /> basket and check cap <br /> and gasket seal as <br /> well as bolts. <br /> 5.6 Filter a. Check that the filter []Yes []No* ❑N/A <br /> is in good condition <br /> and is within the <br /> manufacturer's <br /> expected service life. <br /> Replace, if necessary. <br /> b. Check for leaks and []Yes []No* ❑N/A <br /> decreased fuel flow <br /> 5.7 Flame Follow manufacturer's []Yes* ❑ No ❑N/A <br /> arrestors instructions. Check for <br /> corrosion and <br /> blockage of air <br /> passages. <br /> 5.8 Leak detector Test according to []Yes []No* ❑N/A <br /> for manufacturer's <br /> submersible instructions and <br /> pump authority having <br /> systems jurisdiction (AHJ). <br /> Verify leak detectors <br /> are suited and <br /> properly installed for <br /> aboveground use. <br /> 5.9 Liquid level a. Has equipment LYes I No* I N/A <br /> equipment been tested to ensure <br /> proper operation? <br /> b. Does equipment []Yes []No* ❑N/A <br /> operate as required? <br /> c. Follow []Yes []No* ❑N/A <br /> manufacturer's <br /> instructions <br /> 5.10 Overfill a. Follow ❑Yes ❑No* ❑N/A <br /> equipment manufacturer's <br /> instructions and <br /> regulatory <br /> requirements for <br /> inspection and <br /> functionality <br /> verification. <br /> b. Confirm device is []Yes []No* ❑N/A <br /> suited for above <br /> ground use by the <br /> manufacturer <br /> AST INSPECTION STANDARD 11 SEPTEMBER 2011 <br /> COPYRIGHT©2011 Steel Tank Institute <br />