Laserfiche WebLink
10/07/2010 THU 16:33 iR C5180 2001 <br />***************** <br />*** TX REPORT *** <br />***************** <br />JOB NO. 3707 <br />ST. TIME 10/07 16:27 <br />PGS. 2 <br />SEND DOCUMENT NAME <br />TX IMCOMPLETE ----- <br />TRANSACTION OK ----- <br />ERROR 98337676 <br />October 6, 2010 <br />San Joaquin County <br />Environmental Health Department <br />600 East Main Street <br />Stockton, California 95202-3029 <br />Ramesh Sood <br />A -One Gas & Food <br />574 W. Grant Line Rd. <br />Tracy, CA 95376 <br />Website: www.sjgov.org/ehd <br />Phone: (209) 468-3420 <br />Fax: (209) 464-0138 <br />DIRECTOR <br />Donna Heran, REHS <br />PROGRAM COORDINATORS <br />Robert McClellon, REHS <br />Jeff Carruesco, REHS, RDI <br />Kasey Foley, REHS <br />Linda Turkatte, REHS <br />Re: A -One Gas & Food SR0060720 <br />574 W. Grant Line Rd., Tracy <br />The San Joaquin County Environmental Health Department (EHD) has completed the review of <br />the application for a permit to replace the 87 and 91 primary piping with double walled flex <br />piping on the underground storage tank (UST) system at the above noted address. The permit <br />has been approved with the following conditions: <br />1. Contact the local fire department and the San Joaquin Valley Air Pollution Control <br />District for any applicable permits and requirements. <br />2. Any changes in information and scope of work must be submitted to EHD for approval <br />prior to commencing work. All new addenda supersede the previous ones. <br />3. Contact Stacy Rivera at (209) 468-3440 to arrange the following inspection <br />appointments (a 48-hour notice is required for inspection appointments). Please be <br />aware that inspections for emergency work must be scheduled within five days of permit <br />approval. <br />a. Primary piping soap test: One hour pneumatic pressure test at 110% of operating <br />pressure, or 40 psi, whichever is greater. <br />b. Secondary piping soap test: One hour pressure test per manufacturer's guidelines. If <br />there are no manufacturer's guidelines, test shall be performed using an applicable <br />method specified in an industry code or engineering standard. <br />c. 24-hour hydrostatic test (or equivalent) on 87 and 91 STP sumps and all UDCs. <br />d. Secondary containment testing on 87 and 91 piping. <br />Please be aware that the facility cannot operate the UST system prior to the EHD <br />