Laserfiche WebLink
Be sure to always READ THE DRAWINGS or plans <br />F1I � 1goaIMA NA to make sure that your mounting points are the <br />same. Call Bravo Systems if any problem occurs. <br />A2 -Position and bolt down conversion frame to the dispenser pan using the <br />anchor plates of the conversion frame with minimum 1/2" Diameter bolts. Use plastic <br />caps to cover the bolts/nuts. <br />For Non -Bravo Sumps - A minimum of Four anchor bolts must be secured directly to concrete. <br />A3 - Adjust electrical conduits to line up with the new dispenser if necessary. <br />A4 - Pre -plumb all product inlets and vapor recovery line with offsets and/or rigid <br />pipe and elbows if necessary. <br />DEPENDING ON NEW DISPENSER USED AND/OR <br />OFFSET APPLICATION, THE RISER ON THE DISPENSER MAY <br />F-M-ould-TE NEED TO BE SHORTENED TO ACCOMMODATE THE SPACE <br />TAKEN UP BY THE USE OF OFFSETS, ELBOWS, ETC... <br />A5 -Position and bolt down the dispenser to the conversion frame with the anchor <br />bolts provided. <br />NEW DISPENSER BASE <br />CONVERSION FRAME <br />Conversion Anchor Bolt <br />Anchor Plate <br />Concrete Anchor Bolt <br />a -7 <br />'VARIES <br />BRAVO <br />OFFSET <br />BRAVO BOX <br />OFFSET <br />BRAVO <br />