|
•
<br /> CALIFORNIA REGIONAL WATER QUALITY CONTROL BOARD
<br /> CENTRAL VALLEY REGION
<br /> MONITORING AND REPORTING PROGRAM NO.
<br /> CALIFORNIA WATER CODE SECTION 13267
<br /> FOR
<br /> KEARNEY-NATIONAL, INC. AND
<br /> UPRIGHT CONSTRUCTION
<br /> FORMER KEARNEY-KPF FACILITY
<br /> GROUNDWATER TREATMENT AND DISPOSAL SYSTEM
<br /> SAN JOAQUIN COUNTY
<br /> This monitoring and reporting program (MRP)incorporates requirements for monitoring of the
<br /> treatment process, effluent, and groundwater. This MRP is issued by the Executive Officer of the
<br /> California Regional Water Quality Control Board, Central Valley Region(Regional Board)pursuant to
<br /> California Water Code Section 13267. The Discharger shall not implement any changes to this MRP
<br /> unless and until a revised MRP is issued by the Executive Officer. Specific sample station locations
<br /> shall be approved by Regional Board staff prior to implementation of sampling activities.
<br /> All samples shall be representative of the volume and the nature of the discharge and matrix of the
<br /> sampled medium. The time, date, and location of each grab sample shall be recorded on the sample
<br /> chain of custody form.
<br /> Field testing instruments (such as those used to test pH and dissolved oxygen)may be used provided
<br /> that:
<br /> 1. The operator is trained in proper use and maintenance of the instruments; A.2. The instruments are calibrated prior to each monitoring event; A
<br /> 3. Instruments are serviced and/or calibrated by the manufacturer at the recommended frequency;
<br /> and
<br /> 4. Field calibration reports are provided with the appropriate monitoring report.
<br /> The Site has 13 shallow zone monitoring wells (MWs), seven shallow zone piezometers, 16
<br /> intermediate zone MWs, two intermediate zone piezometers, six deep zone MWs, and one production
<br /> well, as shown in Attachment B and listed below. Of these 45 wells, one deep well(INJ-1), three
<br /> shallow piezometers (KPS-5, TP-lA and TP-3A), four shallow MWs (SMW-1, SMW-2, SMW-4, and
<br /> SMW-5), and/or two intermediate MWs (KEW-lU and KEW-2U)may be used as injection wells. Up
<br /> to five intermediate zone MWs (KEW-3U, KEW-4U,KI-3, KI-5, and KI-12) are used as extraction
<br /> wells and shall be approved by the Executive Officer prior to extraction activities.
<br /> Shallow Zone Monitor Wells: SMW-1, SMW-2, SMW-3, SMW-4, SMW-5, SMW-6, KS-1,
<br /> KS-2, KS-4, KS-5, KS-6, KS-7, and KS-8
<br /> Shallow Zone Piezometers: B-1, B-4, B-5, TP-lA, TP-2A, TP-3A, and KPS-5
<br /> Intermediate Zone Monitor Wells: KI-2, KI-3, KI-4,KI-5, KI-6,KI-7, KI-8,KI-11,KI-12,KI-13, t T
<br /> KI-14,PX-1, KEW-lU,KEW-2U, KEW-3U, and KEW-4U V
<br /> Intermediate Zone Piezometers: KPU-5 and KPL-5
<br /> Deep Zone Monitor Wells: KD-1, KD-4, KD-5, KD-6, DMW-1, and INJ-1
<br /> Production Wells: SPW
<br /> E
<br />
|