Laserfiche WebLink
5 WRCB,January 2002 Page_of— <br /> 7. UNDER-DISPENSER CONTAINMENT C TESTING <br /> Test Method Developed By: D UDC Manufacturer X Industry Standard D Professional Engineer <br /> D Other(Specify) <br /> Test Method Used: D Pressure D Vacuum RHydrostatic <br /> D Other(Spec) <br /> Test Equipment Used:INCON TS STS Equipment Resolution: .00011, <br /> UDC#1-2 UDC#3-4 UDC# UDC# <br /> UDC Manufacturer: BRAVO BRAVO <br /> UDC Material: STEEL STEEL <br /> UDCDepth: 9 g <br /> Height from UDC Bottom to Top 0 0 <br /> of Highest Piping Penetration: <br /> Height from UDC Bottom to 0 0 <br /> Lowest Electrical Penetration: <br /> Condition of UDC prior to Good Good <br /> test ng: <br /> Portion of UDC Tested 3" 3" <br /> Does turbine shut down when <br /> UDC sensor detects liquid(both D Yes D No PINA D Yes C No ®'NA D Yes D No DNA qDNo roduct and waterTurbine shutdown response time <br /> Is system programmed for fail- Dyes DNo VNA DYes DNo WNA DYes DNo DNA <br /> safe shutdown?' <br /> Was fail-safe verified to be D Yes Noo emtional?' fNA ❑Yes ❑No <br /> EkNA D Yes D No D NA D Yes D No DNA <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> startin test <br /> Test Start Time: 0953 0953 <br /> Initial Readin R, : 0.5596 1.3332 <br /> - -- <br /> Test End Time: 1008 1008 <br /> Final Reading(RF): 0.5593 1.3327Ed <br /> Test Duration: 15 min 15 min <br /> Chane in Reading(RF-Rt): 0.0003 0.0005— <br /> P <br /> .0005 <br /> Pass/Fail Threshold or Criteria: 0.002 0.002 <br /> Test Result: 9 Pass D Fail 4!k Pass D Fail D Pass D Fail D Pass D Fail <br /> Was sensor removed for testing? D Yes C No Id NA D Yes D No V NA C Yes D No DNA D Yes D No DNA <br /> Was sensor properly replaced andffiNA ❑Y <br /> verified functional after testing? IF]Yes ❑No es ❑No8NA DYes 0 N DNA DYes DNo DNA <br /> Comments—(include information on repairs made prior to testing and recommendedfollow-up for ailed tests) <br /> If the entire depth of the UDC is not tested,specify how much was tested. If the answer to 9py of the questions indicated with an <br /> asterisk M is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160) <br />