Laserfiche WebLink
.RECENED <br /> SEP 2 2 2016 <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ ENVIRONMEN UOL H <br /> EALI <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ DEPARTMEN f <br /> Test Method Developed By: ❑ Sump Manufacturer M Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic <br /> ❑ Other(Spec) <br /> Test Equipment Used: Incon Sump Tester Equipment Resolution_ +/-0.002" <br /> Fill Sump#87 �ry Fill Sump 91 <br /> Sump Diameter: 42" 42" <br /> Sump Depth: 52" 53" <br /> Height from Tank Top to Top of 18" 16' <br /> Highest Piping Penetration: _ { <br /> Height from Tank Top to Lowest 22„ 191, ! <br /> Electrical Penetration: <br /> Condition of sump prior to Good Good <br /> testing: _ <br /> Portion of Surnp Tested 2"above piping 2"above pipingi <br /> Sump Material: Fiberglass Fiberglass I <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes 30 minutes <br /> starting test: <br /> Test Start Time: 11:36 am 11:53 am <br /> Initial Reading Rj): 4.0112 2.1134 <br /> Test End Time: 11:51 am 12:08 put <br /> Final Reading RF : 4.0108 2.1133 <br /> Test Duration: 15 min. 15 min. <br /> Change in Reading(RF-Rj): 0.0004 0.0001 <br /> Pass/Fail Threshold or Criteria: +/_0,002" +/-0.002" <br /> Test Result: ID Pass ❑Fail © Pass ❑Fail <br /> Is there a sensor in the sump? ®Yes ❑No ® Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is ❑ Yes❑No®NA ❑ Yes❑No®NA <br /> detected? <br /> Was sensor removed for testing? ® Yes❑No❑NA M Yes❑No❑NA <br /> Was sensor properly replaced and ®yes❑No❑ NA ®Yes ❑No❑ NA <br /> verified functional after testing? <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work <br /> `t <br />