Laserfiche WebLink
RESNA SITE SAFETY PLAN <br />Physical Hazards <br />Taskls) <br />Hazard <br />Mitigation Measure <br />Diesel <br />quipment (Noise & Physical <br />All heavy equipment used on this project will be <br />) <br />in good working order and operated in <br />accordance with recognized industry standards <br />and Cal -OSHA Title 8, Subchapter 4, <br />Construction Safety Orders. In addition, an <br />exclusion zone applies to all personnel. The <br />exclusion zone will be 20 feet to the front and <br />either side of the operating drill rig. Personnel <br />will not be allowed under booms or augers at <br />42Dust <br />any time. <br />All equipment operators and ground crews <br />working in close proximity of heavy equipment <br />will be supplied with ear protection. <br />The dust hazardwill be mitigated by not <br />allowing ground crew to be located down wind <br />of drilling and excavation activity. In addition, <br />water will be applied to control the dust if <br />visible levels of dust are generated. <br />Fire and Explosion Hazards <br />List Flammable or Combustible materials on-site. Keep sources of ignition away from these materials. <br />Flammable (Flash Point <100 OF) <br />Combustible (Flash Point <200 OF) <br />Gasoline <br />Diesel <br />Type and Location of Fire Extinguishers (Show on map for large projects) <br />During Task 2 a multipurpose dry chemical fire extinguisher will be located within 15 feet of all site <br />activities. <br />SSPC-SSI' PAGE 4 MAY 1994 <br />