Laserfiche WebLink
Vt cC GWl tV a/VrAI rRVll V aa:---- --V-- . uv <br /> rUSi SYSUM DRAWING INFORMATION 1.0 <br /> 1. X Three complete sets of plans (include manufacturer's specification sheen for proposed equipment to be installed)- <br /> 2. X plans drawn to scale in non-erasable print. <br /> 3. X Plot plan to show location of tanks and all associated piping. TK1-1 <br /> 4. X Striker places or drop tube-mounted bottom protectors illustrated below at( accessible openings TK1-2 <br /> 5. X Tank cross-sectional diagram. TK1-2 <br /> 6. X Detail of tank, associated piping, excavation and cover. TK1-2r TK2-1 <br /> 7. ,}L_ Tank(s) and piping approved by a nationallyde 23, Chapter 26, <br /> Article 3, Section 2631 (b) A 2635] UL- 716 <br /> 0, X Verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. <br /> 9. X Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. ATTACHED <br /> 10: X At the installation site, prior to installation, a tightness test shall be performed on both primary (10) and <br /> secondary (2°) containment systems before covering. (Section 2635 (a) (3) 8 (4)] TK1-1 <br /> 11. X Tank integrity test required upon completion of installation with tank in operating condition. Test results to be <br /> submitted directly to PNS-END from the testing company or owner of facility. (Health 8 Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (h)] TK1-1 <br /> 12 IANC COMPOSITION <br /> TANK A. p P a p N <br /> CAPACITY 20,,000 L0,000/10,000 <br /> MANUFACTURER MODERN WEL ING <br /> COMPOSITION FIBERGLASS COATED STEEL <br /> MODEL GLASSTEEL <br /> PRODUCT 87 89/92 <br /> CORROSION PROTECTION FRP FRP r <br /> C.L. l]STED <br /> COMPATda1ClTY WITH tog% YES YES <br /> OETHANOL <br /> 13. TANK(a) TO OF INSTALLED <br /> X A. Steel-clad with fiberglass reinforced plastic coatings, composites, or equivalent non-metaltic exterior <br /> coatings or coverings. <br /> (1) Tested at The installation site using an electric resistance holiday detector. <br /> (2) Vacuum applied to interstitial space. <br /> a. Fiberglass <br /> _— (1) Installation instructions require an air test and soap bubble test prior to installation. <br /> (2) Vacuum applied to interstitial space. <br /> (3) Hydrostatic annular (primary tank pressure test). <br /> C. Non-clad steel tank (Section 2635 (a) (2) (A)] <br /> (1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br /> etc.). <br /> (2) Field inStalled cathodic protection systems designed and certified as adequate by a <br /> corrosion specialist. <br /> (3) Impressed current systems to be inspected no less than every 60 days- <br /> 5 <br />