Laserfiche WebLink
5. UNDER-DISPENSER CONTAINMENT(UDC)TESTING DEC 01 2014 <br /> 'best Method Developed By: ❑ UDC Manufacturer 19 Indust Standard <br /> D D Professional Ettgineer <br /> CD Other(Specify) VIRC)�111iIEN M L HEA <br /> Test Method Used: El <br /> � 1-1drosta❑ Pressure ❑ Vacuum y trtDC EPARTE <br /> ❑ Other(Specify) <br /> `lest Equipment Used: Inc.an Su nip Tester — <br /> W Eelutp ent Resolutioli: +/-0.002,, <br /> 7.e <br /> UDC <br /> UDC Manufacturer. Environ <br /> UDC Material: <br /> --_ Pal <br /> UDC De the 31„ <br /> Height from UDC Bottom to Top <br /> of Highest Pi in Penetration: 7" <br /> Height from UDC Bottom to <br /> Lowest Electrical Penetration: fill <br /> Condition of UDC prior to <br /> testing: Good <br /> Portio _ 2"'above i in <br /> Does turbine shut down when— <br /> UDC <br /> hen <br /> UDC sensor detects liquid(both ❑Yes❑No ®NA <br /> roduct and water)?' <br /> Turbine shutdown res anse time NIA <br /> Is system programmed for fail- — <br /> safe shutdown?' ❑Yes❑No NA <br /> Was fail-safe verified to be <br /> o erational?' ❑Yes D No ®NA <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes <br /> starting test <br /> Test Start Time- 10:10 am -- <br /> Initial Readin 6.6286 <br /> Test End Time: 10:25 am <br /> Final Readin (110: 6.6287 <br /> Test Duration: —ry 15 min. <br /> Chan a in Reading(R—R.). 0.0001 — <br /> Pass/Fail Threshold or Criteria: +/-0.002" <br /> Test Result: IBJ Pass 0 Fail <br /> Was sensor removed for testing? 0 Yes❑No❑NA <br /> Was sensor properly replaced and <br /> verified functional after testing? <br /> ❑Yes❑ No [3 NA <br /> COMme>tts—(include information on repairs made prior to lesting, and recotnt?ieiided follo4v-tt br ailed tests) <br /> "Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work", <br /> Installed new Disp# 3-4. <br /> If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an <br /> asterisk(*) is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160) <br />