COMPLIANCE INFO 2004 - 2006 - Laserfiche WebLink

Home Browse Search

' If the entire depth of the sump is not tested, specify how much was tested. If the answer to gpy of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160) Page of SWRCB, January 2002 12. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer x Other (Spec) County Protocol Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic 0 Other (Spec) Test Equipment Used: Incon STS Equipment Resolution: .002 Sump #Oil Trans Sump 9 Sump 4 Sump # Sump Diameter: 35" Sump Depth: 10.5" Sump Material: Fiberglass Height from Tank Top to Top of 7" Highest Piping Penetration: Height from Tank Top to Lowest 7" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested' 2" over piping Does turbine shut down when sump sensor detects liquid (both ❑Yes 11No x NA ❑ Yes ❑No DNA ❑ Yes F1 No ❑ NA F1Yes ❑ No xNA product and water)?* Turbine shutdown response time seconds Is system programmed for fail-safe ❑ Yes ❑ No x NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ Yes ❑ No x NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA operational?` Wait time between applying pressure/vacuum/water and starting 30 Minutes test: Test Start Time: 2:26 / 2:42 Initial Reading (Rj): 2.8492 / 2.8493 Test End Time: 2:41 / 2:57 Final Reading (RF): 2.8491 / 2.8490 Test Duration: 15 min ! 15 min Change in Reading (RF-Ri): .0000/.0003 Pass/Fail Threshold or Criteria: .002 Test Result; X Pass []Fail ❑ Pass D Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? X Yes ❑ No [INA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No [INA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and X Yes D No [INA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA verified functional after testing? Comments — (include information on repairs made prior to testing and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to gpy of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)