COMPLIANCE INFO 2004 - 2006 - Laserfiche WebLink

Home Browse Search

Portion of UDC Tested` Does turbine shut down when UDC sensor detects liquid (both product and water)?` Turbine shutdown response time is system programmed for fail- safe shutdown?` Was fail-safe verified to be Wait time between applying pressure/vacuum/water and starting test Test Start Time: Initial Readin (Ri Test End Time: Final Reading (RF): Test Duration: Change in Reading (RF -RI): Pass/Fail Threshold or Criteria: Test Result: Was sensor removed for testing? Was sensor properly replaced and verified functional after testing? 2" over i e X Yes ❑ No ❑ NA X Yes ❑ NoCJ NA X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA 10 Seconds X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA X Yes ❑ No LJ NA X Yes ❑ No [INA X Yes ❑ No ❑ NA X Yes []No ❑ NA X Yes []No ❑ NA X Yes []No ❑NA 30 minutes 1:24 / 1:45 5.684415.6845 1:39 / 2:00 5.6844 / 5.6843 15 min. 1 15 min. .0000 /.0002 .002 x Pass ❑ Fail X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Pass d Fail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No [INA ❑ Pass ❑ Frail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Pass ❑ Frail ❑ Yes ❑ No [INA ❑ Yes ❑ No ❑ NA Comments — (include in ormation on re airs made rior to testin and recommended follow-up for failed tests) I If the entire depth of the UDC is not tested, specify how much was tested. If the answer to My of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -I60) • Page » of SWRCB, January 2002 14. UNDER -DISPENSER CONTAINMENT 0 Q TESTING '-rest Method Developed By: ❑ UDC Manufacturer ❑ industry Standard ❑ Professional Engineer X Other (Spec) County Protocol Test Method Used: 0 Pressure [1 Vacuum X Hydrostatic [I Other (Specify) Test Equipment Used: lncon STS Equipment Resolution: .002 Ul)C #Sat 4 UDC # UDC # UDC # UDC Manufacturer: Western Fiber lass UDC Material: Fiber lass UDC Depth: 30" Height from UDC Bottom to Top 12" of Hi hest Pi incr Penetration: Height from UDC Bottom to 6]) Lowest Electrical Penetration: Condition of UDC prior to Good Portion of UDC Tested` Does turbine shut down when UDC sensor detects liquid (both product and water)?` Turbine shutdown response time is system programmed for fail- safe shutdown?` Was fail-safe verified to be Wait time between applying pressure/vacuum/water and starting test Test Start Time: Initial Readin (Ri Test End Time: Final Reading (RF): Test Duration: Change in Reading (RF -RI): Pass/Fail Threshold or Criteria: Test Result: Was sensor removed for testing? Was sensor properly replaced and verified functional after testing? 2" over i e X Yes ❑ No ❑ NA X Yes ❑ NoCJ NA X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA 10 Seconds X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA X Yes ❑ No LJ NA X Yes ❑ No [INA X Yes ❑ No ❑ NA X Yes []No ❑ NA X Yes []No ❑ NA X Yes []No ❑NA 30 minutes 1:24 / 1:45 5.684415.6845 1:39 / 2:00 5.6844 / 5.6843 15 min. 1 15 min. .0000 /.0002 .002 x Pass ❑ Fail X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Pass d Fail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No [INA ❑ Pass ❑ Frail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Pass ❑ Frail ❑ Yes ❑ No [INA ❑ Yes ❑ No ❑ NA Comments — (include in ormation on re airs made rior to testin and recommended follow-up for failed tests) I If the entire depth of the UDC is not tested, specify how much was tested. If the answer to My of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -I60)