COMPLIANCE INFO_2016-2018 - Laserfiche WebLink

Home Browse Search

7. UNDER-DISPENSER CONTAINMENT UD TESTING Test Method Developed By: ❑ UDC Manufacturer U Industry Standard ❑ Professions neer ❑ Other(Speclfy) Z��6 Test Method Used: ❑Pressure ❑ Vacuum ®Hydrostatic ❑ Other(Specify) '711 M Test Equipment Used: Incon TS-STS Sump Test System Equipment Resolution: +/_0.002" /� UDC# UDC# UDC N UDC UDC Manufacturer: Environ Environ UDC Material: Plastic Plastic UDC Depth: 26" 26" Height from UDC Bottom to Top 12" 12" of Highest Pi in Penetration: Height from UDC Bottom to 6" 6" Lowest Electrical Penetration: Condition of UDC prior to testing: Good Good Portion of UDC Tested 4"Above Pen.FAbeen.Does turbine shut down whenUDC sensor detects liquid(both ❑Yes❑No U NU NA ❑Yes❑No UNA ❑Yes❑No UNA roduct and water TTurbine shutdown reonse time N/AIs system programmed forfail- ❑yes❑No U N ®NA ❑Yes❑No ®NA ❑Yes❑No UNA safe shutdown7Was fail-safe verified to be ❑Yes❑No ®NNA ❑Yes❑No ®NA ❑Yes❑No UNA o eraUonal'TWait time between applying pressure/vacuum/water and 30 minutess starting test Test Start Time: 09:17 AM09:17 AM Initial Reading(R): 6.0309 6.6059 Test End Time: 09:32 AM 09:32 AM Final Reading(RF): 6.03 6.6062 Test Duration: 15 min. 15 min. Change in Reading(RF-RD: -0.0009 0.0003 Pass/Fail Threshold or Criteria: +/-0.002 +/-0.002 Test Result: Pass Pass Was sensor removed for testing? Yes Yes Was sensor properly replaced and verified functional after testing? Yes Yes Comments—(include i)1formation on repairs made prior to testing, sad recommended ollom-Op for failed tests) Sensor functionality was not confirmed.This procedure H not part of the Secondary Containment Testing scope of work. If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See S WRCB LG-160)