Laserfiche WebLink
8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps We Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer ®Industry Standard ❑Professional E—njg e <br /> ❑Other(Specie) <br /> Test Method Used: ❑Pressure ❑ Vacuum ®Hydrostatic• ! n. <br /> El Other(Spec) <br /> Test Equipment Used: ancon TS-STS Sump Test System Equipment Resolution: +/-0.002" <br /> 87 T1 87 T2 91 <br /> Sump Diameter: - - <br /> Sum De th: <br /> Height from Tank Top to Top of <br /> Hi hest Pi ' Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing., <br /> Portion of Sump Tested <br /> Smnp Material: <br /> Wait time between applying <br /> pressurelvacuutnhvater and <br /> startin lest: <br /> Test Start Time: <br /> Initial Reading(Rr): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change iu Reading(RP-R,): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: Not Tested Not Tested Not Tested <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testing? <br /> Was sensor properly replaced and <br /> verified functional after testing? <br /> Comments—(include infonnation on repairs made prior to testing and recommended follow-up for failed tests) <br /> Exempt from Testing-Continuously Monitored <br />