Laserfiche WebLink
v Appendix Vi <br /> MONITORING SYSTEM CERTIFICATION <br /> For Use By Ali Jurisdictions Within the State of California <br /> Authority Cited: Chapter 6.7, Health and Safety Code; Chapter 16, Division 3, Title 23, California Code of <br /> Regulations <br /> This form must be used to document testing and servicing of monitoring equipment.A separate certification or report must be prepared for <br /> each monitoring system control panel by the technician who performs the work.A copy of this form must be provided to the tank system <br /> owner/operator.The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. <br /> A. General Information <br /> Facility RIVER POINT LANDING <br /> site 4950 BUCKLEY COVE WAY <br /> adrtrr« city; STOCKTON, CA Zip: 95219 <br /> Facility Contact <br /> pari^n' RICH Contact Phone Na.: (209)951'4144 <br /> Make/Model of Monitoring System: RONAN X 16 S Date of Testing/Servicing: 1/1412011 <br /> B. Inventory of Equipment Tested/Certified <br /> Check the appropriate boxes to indicate specific equipment inspected/serviced: <br /> Tank ID: 89 LTank : RED DIESEL <br /> ❑ In-Tank Gauging Probe. Model: nk Gauging Probe. Model: <br /> ® Annular Space or Vault Sensor. Model: LS-3 lar Space or Vault Sensor. Model: LS-3 <br /> 0 Piping Sump 1 Trench Sensor(s). Model: LS-3 g Sump/Trench Sensor(s). Model: LS-3 <br /> ❑ Fill Sump Sensor(s). Model: ump Sensor(s). Model: <br /> 0 Mechanical Line Leak Detector. Model: STP-MLDanical Line Leak Detector. Model: STP-MLD-D <br /> ❑ Electronic Line Leak Detector. Model: ronic Line Leak Detector. Model: <br /> ❑ Tank Overfill I High-Level Sensor. Model: Overfill I High-Level Sensor. Model:❑ Other(specify equipment type and model in Section E on Page 2). (specify equipment type and model in Section E on Page 2). <br /> Tani Tani <br /> ❑ In-Tank Gauging Probe. Model: ❑ In-Tank Gauging Probe. Model: <br /> ❑ Annular Space or Vault Sensor. Model: ❑ Annular Space or Vault Sensor. Model: <br /> ❑ Piping Sump/Trench Sensor(s). Model ❑ Piping Sump/Trench Sensor(s). Model: <br /> ❑ Fill Sump Sensor(s)- Model: ❑ Fill Sump Sensor(s), Model: <br /> ❑ Mechanical Line Leak Detector. Model: ❑ Mechanical Line Leak Detector. Model: <br /> ❑ Electronic Line Leak Detector. Model: ❑ Electronic Line Leak Detector. Model: <br /> ❑ Tank Overfill/High-Level Sensor. Model: ❑ Tank Overfill/High-Level Sensor Model: <br /> ❑ Other(specify equipment type and model in Section E on Page 2). ❑ Other(specify equipment type and model in Section E on Page 2). <br /> Dispenser ID: 1/2 Dispenser ID: 3/4 <br /> ❑ Dispenser Containment Sensor(s). Model: ❑ Dispenser Containment Sensor(s). Model: <br /> ® Shear Valve(s), ® Shear Valve(s). <br /> ® Dispenser Containment Float{s)and Chain(s). lZ Dispenser Containment Float(s)and Chairi <br /> Dispenser ID: Dispenser ID: <br /> Dispenser Containment Sensor(s) Model: 0 Dispenser Containment Sensor(s). Model: <br /> ❑ Shear Valve(s). ❑ Shear Valve(s). <br /> [ Dispenser Containment Floats)and ii ❑ Dispenser Containment Float(s)and Chain(s). <br /> Dispenser ID: Dispenser ID: <br /> ❑ Dispenser Containment <br /> ❑ Dispenser Containment Sensor(s). Model: Sensor(s). Model: <br /> ❑ Shear Valve(s) ❑Shear Valve(s). <br /> ❑ Dispenser Containment Float(s)and Chain(s). ❑ Dispenser Containment Float(s)and Chain(s). <br /> *if the facility contains more tanks or dispensers,copy this form Include information for every tank and dispenser at the facdIty. <br /> C.Certification-I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' <br /> guidelines.Attached to this Certification Is Information(e.g.manufacturers'checklists)necessary to verify that this information is correct <br /> and a Plot Plan showing the layout of monitoring equipment.For any equipment capable of generating such reports,I have also attached a <br /> copy of the report;(check all that apply): ❑System set-up ❑Alarm history report <br /> Technician Name(print): ZANE NIMMO Signature: _ <br /> Certification No.: 5263327-UT CA UTT2206 Nevada UST26755 Oregon License No: 04-1676 CA 2206 Nevada 26755 Oregon <br /> Testing Company Name. AFFORDA-TEST Phone No. (209)744-0113 <br /> Testing Company Address: 416 2" STREET GALT,CA 95632 Date of Testing/Servicing: 1/14/10 <br /> Monitoring System Certification Page 1 of 4 2/21/07 <br />