COMPLIANCE INFO_2010 REPAIR - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 4 of 5 6.PIPING SUMP TESTING Test Method Developed by © Sump Manufacturer ® Industry Standard O Professional Engineer ❑ Other(Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic C Other(Specify) Fest Equipment Used: ]neon TS-STS Equipment Resolution. .0006 Sump#UE042UOOI Sump# Sump# Sump# Sump Diameter 38" �. Sunt De th 41" Sump Material Fiberglass Height from Tank Top to Top of 16" Highest Piping Penetration Height from Tank Top to Lowest 10" Electrical Penetration Condition of sumR prior to testing Good Portion of Sump Tested(1) 2"above pen Does turbine shut down when sump sensor detects liquid(both ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Ycs [] No O NA ❑ Ycs © No O NA product and water ?* Turbine shutdown res use time NA Is sytern programmed for fail-safe ❑ Ycs ❑ No N NA ❑ Ycs ❑ No ❑ NA ❑ YCS ❑ No ❑ NA d Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Ycs Cl No ❑ NA ❑ Ycs ❑ No ❑ NA operational?* Wait time between applying pressurelvaeuum/water and starting 15 MIN test Test Start Time 12:02 PM 12:18 PM Initial Reading(Ri) 5.2276 5.2271 Test End Time 12:17 PM 12:33 PM Final Reading R 5.2270 5.2268 Test Duration 15 MIN 15 MIN Chan a in Reading Rf-Ri .0006 .0003 Pass/Fail Threshold or Criteria .002 Test Result ® Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? El Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Ycs ❑ No ❑ NA 0 Ycs © No ❑ NA Was sensor properly replaced and C YC.s ® No 0 NA © Y" ❑ No ❑ NA Q Yes ❑ No ❑ NA ❑ Yes 0 No ED verified functional after testing? Comments include any information on repairs made prior to testing,and recommended follow-ug for failed tests The sensor was reinstalled to the lowest point but not tested. (1) If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)