COMPLIANCE INFO_2010 REPAIR - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 5 of 5 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed by ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other(Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other(Spccify) Test Equipment Used: Incon TS-STS Equipment Resolution: .0006 Fill Sump#Fill Fill Sump#Middle Fill Sump# Fill Sump# UE042UODI UE042U001 Sump Diameter: 38" 38" Surnp Depth: 40.5" 41" Height from Tank Top to Top of 10" N/A High tPipink Penetration: Height from Tank Top to Lowest 8" 14" Electrical Penetration: Condition of sum prior to testing: Good Good Portion of Sump Tested: 2"above an 2"above Collar Sumv Material: Fiberglass Fiberglass Wait time between applying 15 min 15 min pressure/vacuum/water and starting test: Test Start Time: 12:02 pm 12:18 yrn 12:02 pm 12:18 pm Initial Reading Ri): 2.2099 2.2100 1.3296 1.3291 Test End Time: 12:17 prn 12:33 pm 12:17 pm 12:33 pm Final Reading[90.: 2.2099 2.2099 1.3291 1.3286 "fest Duration: 15 min 15 min 15 min 15 min Chan a in Reading Rf-Ri : .0000 .0001 .0005 .0005 Pass/Fail Threshold or Criteria: 002 .002 Test Result: 0 Pass © Fail 0 Pass ❑ Fail ❑ Pass ❑ Fall ❑ Pass Cl Fall Is there a sensor in the sump? ® Yes ❑ No 0 Yes ❑ No ❑ Yes © No ❑ Yes ❑ No Does the sensor alarm when either ❑ Yes ® No ❑ NA ❑ Yea ® No ❑ NA ❑ Yes ❑ No ❑ NA Cl Ycs ❑ No ❑ NA product or water is detected? Was sensor removed for testing? 0 Yes ❑ No ❑ NA ® Ycs ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was Sensor properly replaced and ❑ Yes IM No 0 NA ❑ Yes ® No ❑ NA ❑ Yes ❑ Nu D NA ❑ Yes C3 No 13 NA verified functional after testing? Comments include any information on repairs madeprior to lestinje.and recommended follow-up for failed tests The sensors were reinstalled to lowest point,but not tested.