COMPLIANCE INFO 1994-2010 (2) - Laserfiche WebLink

Home Browse Search

Software Version Installed: N/A Cont tete the following checklist: M Yes ❑ No* I Is the audible alarm operational? 0 Yes ❑ No* Is the visual alarm operational? 0 Yes ❑ No* is the print function operational? X Not instalied- *Yes 0 No* Were all sensors visually inspected, functionally tested,and confirmed operational? Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? ❑ Yes [] No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) ❑ N/A operational? ❑Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment N/A monitoring system detects a leak,fails to operate, or is electrically disconnected? If yes: which sensors initiate positive shut-down? (ChecA all that apply) ❑ 5uiviplTr enc; Sensors; ❑ Dispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ❑ Yes; ❑ No. ❑Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no M N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly? If so,at what percent of tank capacity does the alarm trigger? ❑ Yes* ® No Was any monitoring equipment replaced? If' yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E,below. ❑ Yes" Z No Was liquid found inside any secondary containment systems designed as dry systems? (Check a/1 that apply) ❑ Product; ❑ Water_ IF yes,describe causes in Section E, below. ® Yes ❑ No* Was monitoring system set-up reviewed to ensure ro er settings?Attach set up reports, if applicable •Yes ❑ Noy is all monitoring equipment oerational per manufacturer's specifications? * In Section E below,describe how and when these deficiencies were or will be corrected. E. Comments: This system consists of a single three-compartment tank monitored by an lncon 1000 panel without a printer. Inventory readings are provided by a set of in-tank "Safety Gauges" which consist of a tapemeasure with a float oa one end and a weight on the other. The piping, is a '.lack Koffelt Straight-Up' system that provides full double wall suction piping vertically from the tank to under the dispenser. The tank is directly under the island.