COMPLIANCE INFO 1994-2010 (2) - Laserfiche WebLink

Home Browse Search

[]Check this box if tank gauging is usonly for inventory control. 49 ®Check this box if no tank gauging or SIR equipment is installed and disregard the following section. (This section must be completed if in-tank gauging equipment is used to perform leak detection monitoring). Com lete the following checklist: ❑Yes ❑ No* Has all input wiring been inspected for proper entry and termination, including testing for ground faults? ❑Yes ❑ No* Were all tank-gauging probes visually inspected for damage and residue buildup? El Yes [} No* Was accuracy of system product level readings tested'? E ❑ No* Was accuracy of system water level readings tested'?❑ No* Were all probes reinstalled properly? ❑ No* Were all items on the equipment manufacturer's maintenance checklist completed? * In the Section H, below, describe how and when these deficiencies were or will be corrected. G. Line Leak Detectors (LLD): Check this box if LLDs are not installed and disregard the following section. ❑Yes ❑ No* For equipment start-up or annual equipment certification, was a leak simulated to verify LLD performance? ❑ NIA (Check all that apply) Simulated leak rate: ❑ 3 g.p.h.; ❑ 0.1 g.p.h ; [10.2 g.p.h. ❑Yes ❑ ivo* Were all LLDs confirmed operational and accurate within regulatory requirements? ❑Yes ❑ No* Was the testing apparatus properly calibrated? [�Yes ❑ No* For mechanical LLDs,does the LLD restrict product flow if it detects a leak? ❑ N/A 0 Yes ❑ No* For electronic LLDs, does the turbine automatically shut off if the LLD detects a leak? 0 N/A ❑Yes ❑ No* For electronic LLDs, does the turbine automatically shut off if any portion of the monitoring system is disabled [`] N/A or disconnected'? ❑ Yes ❑ No* For electronic LLDs, does the turbine automatically shut off if any portion of the monitoring system ❑ NIA malfunctions or fails a test? G Yes ❑ No* For electronic LLDs,have all accessible wiring; connections been visually inspected? ❑ N/A ❑ Yes j ❑ No* Were all items on the equipment manufacturer's maintenance checklist completed? * In the Section. H, below,describe how and when these deficiencies were or will be corrected. H. Comments: The "Jack Koffelt Straight Up" safe suction system is self monitoring and testable only with an overfill tank test.