Laserfiche WebLink
0 <br /> 5 Installing your pH Control <br /> 2 Installation Procedures <br /> The following instructions will guide you through installing your pH Control. <br /> tubing runs as short as passible. <br /> 1 A. Position the pH Control containment tray as close <br /> i Imo_ as possible to the drain and water line. <br /> �t 7 <br /> B. Place the Developer and Water tank in the pH <br /> ' control containment tray. <br /> C. Install 3/4" MPT (elbow) x 3/4" barb fitting to the <br /> "Dev Overflow from processor" of the Developer <br /> Tank. Install another fitting to the "Water <br /> Overflow from processor' of the Water Tank. <br /> 2 A. Using 3/4" I.D. tubing, connect the plate proces- <br /> sor developer tank to the pH control developer <br /> tank. Install the Developer bypass inline. <br /> B. Using 3/4" I.D. tubing, connect the bypass to the <br /> drain. <br /> Page 8 Metal"ix pH Control Manual <br />