Laserfiche WebLink
C 2017 Walton Engineering, Inc. <br />h _ ka 9= t1 V <br />PRODUCT PIPING <br />SUMP TESTING <br />Test Method By: 'D Manufacturer <br />• Industry standard Professional Engr Other (see below) <br />Test Method Uses: C Pressure <br />.'vacuum • Hydrostatic Other (see below) <br />Measuring Equipment Used: INCON <br />TS-STS (Electronic Sump Test System) <br />Description Tank #1 <br />Tank #2 <br />Tank product <br />Sump material <br />Sump diameter (inches) <br />Sump depth (inches) <br />Height from tank top to highest <br />piping penetration (inches) <br />Height from tank top to lowest <br />electrical penetration (inches) <br />Method of sump attachment to tank <br />Condition of sump prior to testing <br />Portion of sump tested <br />Is system programmed for fail-safe operation? <br />Was fail-safe verified to be operational? <br />Was sensor removed for testing? <br />Was sensor properly replaced after testing? <br />Depth of water level from tank top (inches) <br />Wait time for water level to stabilize (hr:min) <br />Test start time <br />Initial Probe Reading <br />Test end time <br />Final Probe Reading <br />Test duration (hr:min) <br />Change in water level (± 0.0000 inches) <br />Pass/Fail threshold (±0.002 inches / } Hr.) <br />TEST RESULT <br />Comments: <br />C 2017 Walton Engineering, Inc. <br />