COMPLIANCE INFO 2004 - 2007 - Laserfiche WebLink

Home Browse Search

MONITARING SYSTEM CERTIFITION Use By All Jurisdictions Within the State of Califon' Authority Cited:Chapter 6.7, Health and Safety Code;Chapter 16,Division 3 Title 23, c allfomia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitonng system control panel is installed at the facility,a separate certification or report must be prepared for each monitor np system control oanel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A.General Information Facility Name: CONOCO PHILLIPS#2705445 City: STOCKTON CA Zip:95210 Site Address: 1206 E MARCH LANE Contact Phone No: 478-6487 Date of Testing/Service: 05/05/2006 Facility Contact Person: MANAGER Make/Model of Monitoring System:VRTLS350 Work Order Number: 2242520 B.Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced TanklD: 1 TanklD: 2 X In-Tank Gauging Probe. Model: MAG X In-Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 407 21 Annular Space or Vault Sensor. Model: 407 -91 Piping Sumprrrench Sensor(s). Model: 205 Piping Sump(Trench Sensor(s). Model: 205 Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector, Model: FE PETRO Mechanical Line Leak Detector. Model: FE PETRO Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Madel: 71 Tank Overfill/High-Level Sensor. Model: MECHANICAL X Tank OverfilitHigh-Leval Sensor. Model: MECHANICAL Other(specify equipment type and model in Section E on page 2). D Other(specify equipment type and model in Section E on page 2). Tank ID: Tank ID: X In-Tank Gauging Probe. Model: MAG In-Tank Gauging Probe. Model: X Annular Space or Vault Sensor. Model: 407 Annular Space or Vault Sensor. Model: xj Piping Sump/Trench Sensor(s) Model: 205 Piping SumprTrench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: X Mechanical Line Leak Detector. Model: LD2000 Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: X Tank Overfill/High-Level Sensor. Model: MECHANICAL Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Dispenser : 1/2 Dispenser ID: 3/4 X❑Dispenser Containment Sensor(s) Model:206 X Dispenser Containment Sensor(s) Model:205 TJ Shear Valve(s). :X:j Shear Va[ve(s) E]Dispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(# Dispenser ID: 5 Dispenser ID: 6 x❑ Dispenser Containment Sensor(s) Model:205 Dispenser Containment Sensor(s). Model:205 0 Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(s). Dispenser ID: 7/B Dispenser ID: 9/10 ❑X Dispenser Containment Sensor(s) Model:205 X Dispenser Containment Sensor(s) Model:205 nX Shear Valve(s). X Shear Valve(s} ❑ Dispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(s). 'If the facility contains more tanks or dispensers,copy this form. Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers'guidelines. Attached to this certification is information(e.g manufacturers'checklists)necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment.For any equipment capable of generating such reports,I have also attached a copy of the(Check all that apply): QSystem set-up �Alann history report Technician Name(print): RAYMOND SIMMS Signature: Certification No.: 006-05-0282 License.No.: Testing Company Name:Tanknology Phone No.: (800)800-4633 Site Address: 8501 N.MoPac Expressway,suite 400,Austin,TX 78759 Date of Testing/Servicing: 05/05/2006 Page 1 of 3 Based on CA form dated 03/01 Monitoring System Certification