COMPLIANCE INFO_2008-2015 - Laserfiche WebLink

Home Browse Search

MONIT&ING SYSTEM CERTIM&TION For se By All Jurisdictions Within the State of Califo to Authority Cited: Chapter 6.7, Health and Safety Code;Chapter 16, Division 3, Title 23, California Code of Regulations This form must be used to document testing and servicing of monitoring equipment. A separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information FacilityName: SHANE 8 DA VE'S Bldg.No.: Site Address: 3550 HWY 99 City: STOCKTON Zip: 95215 Facility Contact Person: MIKE ELIASON Contact Phone No.: ( ) Make/Model of Monitoring System: VEEDER-ROOT TLS-350 Date of Testing/Servicing: 4/2/2013 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to indicatespecific a ui ment inspected/serviced: Tank ID: 87 Tank ID: RED DYE DIESEL ®In-Tank Gauging Probe. Model: MAG ®In-Tank Gauging Probe. Model: MAG ®Annular Space or Vault Sensor. Model: 420 ®Annular Space or Vault Sensor. Model: 420 ®Piping Sump/Trench Sensor(s). Model: 208 ®Piping Sump/Trench Sensor(s). Model: 208 ❑Fill Sump Sensor(s). Model: ❑Fill Sump Sensor(s). Model: ®Mechanical Line Leak Detector. Model: MLD STP ®Mechanical Line Leak Detector. Model: LD2000 ❑Electronic Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model: ®Tank Overfill/High-Level Sensor. Model: FLAPPER ®Tank Overfill/High-Level Sensor. Model: FLAPPER ❑Other(specify equipment type and model in Section E on Page 2). ❑Other(specify equipment type and model in Section E on Page 2). Tank ID: Tank ID: ❑In-Tank Gauging Probe. Model: ❑In-Tank Gauging Probe. Model: ❑Annular Space or Vault Sensor. Model: ❑Annular Space or Vault Sensor. Model: ❑Piping Sump/Trench Sensoria). Model: ❑Piping Sump/Trench Sensor(s). Model: ❑Fill Sump Sensor(s). Model: ❑Fill Sump Sensor(s). Model: ❑Mechanical Line Leak Detector. Model: ❑Mechanical Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model: Wq k Overfill/High-Level Sensor. Model: ❑Tank Overfill/High-Level Sensor. Model: � ❑Other(specify equipment type and model in Section E on Page 2). er(specify equipment type and model in Section E on Page 2). Dispenser ID: 112 nser ID: ❑Dispenser Containment Sensor(s). Model: penser Containment Sensor(s). Model: E Shear Valve(s). ar Valve(s). ®Dispenser Containment Float(s)and Chain(s). penser Containment Float(s)and Chain(s). Dispenser ID: nser ID: ❑Dispenser Containment Sensor(s). Model: penser Containment Sensor(s). Model: ❑Shear Valve(s). ear Valve(s). rElispenser Containment Floa[(s)and Chain(s). penser Containment Floats)and Chain(s).penser ID: nser ID:ispenser Containment Sensor(s). :Chain(s). el: spenser Containment Sensor(s). Model:hear Valve(s). ear Valve(s).Dispenser Containment Float(s)and spenser Containment Float(s)and Chain(s). *If the facility contains more tanks or dispensers,copy this form. Include information for every tank and dispenser at the facility. C. Certification -I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this Certification is information (e.g. manufacturers' checklists) necessary to verify that this information is correct and a Plot Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports,I have also attached a copy of the report;(check all that apply): ®System set-up ®Alarm history report Technician Name(print): RICHARD THOMAS Signature: P---z `t----S Certification No.: B34022 License.No.: 803705 Testing Company Name: TANK-TEK ENVIRONMENTAL CORPORATION Phone No.:(707)446-6151 Testing Company Address: 607 ELMIRA ROAD PMB 336 VACAVILLE, CA 95687 Date of Testing/Servicing: 41212013 Page 1 of 4 UN-036— www.unidocs.org Rev.01/17/08